Thread: What should I upgrade first?
05-21-2007, 12:31 PM #1
What should I upgrade first?
I'm taking my new 2007 RXT to Riva on Saturday for it's 10 hour maintenance. Is there anything I should have done while it's there? Maybe an intake grate?
05-21-2007, 01:18 PM #2
1. Replace the ceramic supercharger washers with metal ones from Jerry.
2. Look at that pieces in a stage 1 kit and decide or start with a whole stage 1 kit. Individual peices I would start with an air intake either riva or 4" homemade. It all depends on how big you decide you want to go. It take alot more $ to get a RXT moving than a RXP
05-21-2007, 02:25 PM #3
Why does it take a lot more to make the RXT faster? I know the RXT is only 28 pounds heavier than the RXP.
05-21-2007, 02:36 PM #4
i would definatley do the metal washers
then do the riva pro block offs
riva intake grate
riva pump wedge
that ought to get you hooked pretty good and want to do more
05-21-2007, 03:16 PM #5
05-21-2007, 03:28 PM #6
05-21-2007, 07:08 PM #7
05-21-2007, 07:48 PM #8
Just like everyone else has said do the metal washers first.
I have done the following after the washers in order.
1) Riva Wedge
2) Riva Intake Grate
3) Piranha Motor Mount
4) Riva Rear Exhaust
05-21-2007, 09:19 PM #9
The RXP may not be much lighter but it is shorter. Less wet surface area. The VTS on the RXP helps also.
If your going for pure speed, should have bought a RXP. Sometime i wish i had.
05-21-2007, 09:35 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Fasterner in forum Polaris Open DiscussionReplies: 13Last Post: 06-17-2011, 02:53 PM
By ripcuda in forum Polaris Open DiscussionReplies: 3Last Post: 06-30-2010, 12:27 AM
By mikeymuy in forum 2-Stroke PerformanceReplies: 11Last Post: 07-02-2009, 10:26 AM
By spinaltapls1 in forum 4-Tec PerformanceReplies: 4Last Post: 06-01-2007, 05:04 AM
By DooVa in forum 4-Tec PerformanceReplies: 29Last Post: 03-02-2007, 02:30 PM