05-21-2007, 06:45 PM #1
2000 pro 1200 hood hinge update ??
Does anybody recall a update or service bulletin on the pro 1200
hood hinge area?? Seems it was something about adding a teather ??
05-21-2007, 08:05 PM #2
Yes. Teather to the bottom hinge in case it breaks. Some did, and it would swing up and hit the driver in the face and head. Yummy!!!
05-21-2007, 08:08 PM #3
05-21-2007, 08:09 PM #4
Oh and WELCOME to the Green Hulk Forums!!!
05-21-2007, 08:54 PM #5
Thanks, CrazyA, will do the hood teather
Also, I have my own seat strap update, I have lost my seat several
times catchin big air in the surf. especially if you land backwards and
inverted. Use some 2'' strap with quick tatch buckles and loop it
under the rear handle between the 2 bolts on each side and tighten
it down. I have seen pictures similar to this on a tow in surfers
05-22-2007, 04:27 AM #6
* Polaris Industries, 712-336-3797 (Recall #030113T)
All 1998 SLH (B984673); All 1998 SLXH (B984690); All 1999 SLII (B994673); All 1999 SLX (B994690); All 2000 SLH (W004673); All 2000 SLX (W00699); All 2000 PRO 1200 (W004999); All 2001 SLH (W014697); All 2001 SLX (W014699); All 2001 PRO 1200 W014999):
PWC hinge could fail and permit the hood to separate from the deck. The hood could strike the operator and/or passenger resulting in personal injury or loss of control.
05-22-2007, 10:08 AM #7
i saw a HUUUGE lawsuit someone won last october cause the hood came off and hit the guy in the head..ill try and find it again
it happened years ago..it just took 3 yrs to get to court(imagine that)
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By m.c.dirty in forum Polaris ClassifiedsReplies: 6Last Post: 07-17-2008, 09:23 AM
By ToddPro1200 in forum Polaris ClassifiedsReplies: 0Last Post: 05-28-2008, 09:49 AM
By S12L00X in forum Polaris Open DiscussionReplies: 7Last Post: 07-31-2007, 07:17 AM
By S12L00X in forum Polaris Open DiscussionReplies: 16Last Post: 07-26-2007, 02:21 PM
By S12L00X in forum Polaris PWC PerformanceReplies: 9Last Post: 07-25-2007, 05:16 PM