Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 41
  1. #1
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524

    Rude Charger conversion done to your supercharger $1495

    Nils has decided to take in customers superchargers to convert to Rude Chargers. Cost for this service is $1495 and will come with new stock bearings, metal washers and spring washers. You can opt for the ceramic bearings and cost would then be $1595

    Your core must be a usable core consisting of a housing and shaft assembly that are in good shape. Superchargers that look like they have been laying in the bilge of a shrimp boat will not be accepted

    Turn around time is approximately 1 week. To speed up the process you may not receive your exact core in return.

    To send your supercharger in for the conversion make the purchase for the Rude Charger in the online store and in the comments section please put that you are sending your supercharger in for the conversion. Also state in the comments section if you want to opt for the ceramic bearings so i can charge you accordingly.

    http://www.4-tecperformance.com/inde...roducts_id=454

    Once i receive your order i will email you the address to send your supercharger.


  2. #2
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    How Rude!

  3. #3

    Join Date
    Aug 2006
    Location
    UAE
    Posts
    83
    that a good deal ...Does the RUDE charger come with ceramic ball bearing..??

  4. #4
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,069
    +1
    790
    Quote Originally Posted by Cdoo EtR View Post
    that a good deal ...Does the RUDE charger come with ceramic ball bearing..??

    I have to get you on this.... READ HIS POST!!!!!!



    .

  5. #5

    Join Date
    Aug 2006
    Location
    UAE
    Posts
    83
    Quote Originally Posted by Water4fire View Post
    I have to get you on this.... READ HIS POST!!!!!!



    .
    lol.. my q about the RUDE charger not the conversion "modified SC"

    so i guess i got you on this

  6. #6
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    New Rude chargers come with stock bearings.

  7. #7

    Join Date
    Jul 2005
    Location
    euxton nr chorley lancashire, england
    Posts
    1,500
    +1
    1
    Quote Originally Posted by Green Hulk View Post
    New Rude chargers come with stock bearings.
    has my rude got metal washers?

  8. #8
    BIG BOOST stickem's Avatar
    Join Date
    Jan 2006
    Location
    florida
    Posts
    1,185
    All of the rude chargers have metal washers

  9. #9

    Join Date
    Jan 2007
    Location
    JEDDAH
    Posts
    213
    Quote Originally Posted by Green Hulk View Post
    Nils has decided to take in customers superchargers to convert to Rude Chargers. Cost for this service is $1495 and will come with new stock bearings, metal washers and spring washers. You can opt for the ceramic bearings and cost would then be $1595

    Your core must be a usable core consisting of a housing and shaft assembly that are in good shape. Superchargers that look like they have been laying in the bilge of a shrimp boat will not be accepted

    Turn around time is approximately 1 week. To speed up the process you may not receive your exact core in return.

    To send your supercharger in for the conversion make the purchase for the Rude Charger in the online store and in the comments section please put that you are sending your supercharger in for the conversion. Also state in the comments section if you want to opt for the ceramic bearings so i can charge you accordingly.

    http://www.4-tecperformance.com/inde...roducts_id=454

    Once i receive your order i will email you the address to send your supercharger.
    Dear , i m really thinking to buy a compelet rode sc , do i need to change

    the washer or the bearing , or just keep it as it is , other thing

    can i run this sc to the stock engine or i need to modifiy it

    * can i run the ski deally with zero problem or maintenance

    * can i jump high and race in the same time .

    * dose it run in salt water , with zero maint .

    Thanx
    Last edited by LAB69; 06-04-2007 at 12:20 PM.

  10. #10
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by LAB69 View Post
    Dear , i m really thinking to buy a compelet rode sc , do i need to change the washer or the bearing , or just keep it as it is

    The Rude Charger comes with metal washers so leave it as is.

    can i run this sc to the stock engine or i need to modifiy it

    With the stock ECU you will need a fuel controller and 50# injectors
    With a Rotax Racing ECU you will need a fuel controller and 50# injectors
    With a Riva ECU you will not need a fuel controller, just the 50# injectors it's mapped for.
    With any aftermarket ECU you will need to upgrade the valvetrain. I recommend the Riva valvetrain upgrade.

    * can i run the ski deally with zero problem or maintenance
    No such thing! All skis need maintenance.

    * can i jump high and race in the same time .
    If you are so inclined

    * dose it run in salt water , with zero maint .
    Nothing runs in salt water with zero maintenence. You would give this supercharger the same care you would any other.

    Thanx
    Hope that answers your questions dear

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Thumb to finger Throttle conversion done
    By bruinsrme in forum Sea Doo Open Discussion
    Replies: 19
    Last Post: 04-29-2010, 01:11 PM
  2. F/S: RUDE CHARGER and B KIT Supercharger
    By JFizzleJR in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 09-11-2008, 12:36 AM
  3. Attach your PWC to your boat; has anyone done it and pics?
    By 2006 RXT in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 10-03-2007, 05:38 PM
  4. What to do if your supercharger clutch disentigrates!
    By Green Hulk in forum Sea Doo How To & FAQs
    Replies: 26
    Last Post: 09-18-2007, 09:45 PM
  5. If you need any mods done to your RXP contact W.M.F !
    By speeddemon in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 05-07-2006, 02:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •