Results 1 to 5 of 5
  1. #1
    What would life be without a PWC?........ goBENGALS's Avatar
    Join Date
    Apr 2007
    Location
    Clearwater, FL
    Posts
    103

    water line to front of boat???

    I was looking at beerdarts rebuild and noticed the water manifold recieves water from the pump then the normal 6 hoses to headers and pipes, but then a line goes out the other side of the manifold. (3rd pic)

    In my boat the hose that takes the water from the head to pump housing has a split fitting which leads a hose to the front that ends with the adapter split for the stingers. Is this ok? anyone familiar with this setup? (1st and 2nd pic)

    Sorry for the long post and probably difficult explanation.
    OF COURSE i took some pictures
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	img205.jpg 
Views:	46 
Size:	95.3 KB 
ID:	27330   Click image for larger version. 

Name:	img207.jpg 
Views:	42 
Size:	96.3 KB 
ID:	27331   Click image for larger version. 

Name:	beerdart water.JPG 
Views:	58 
Size:	16.2 KB 
ID:	27332  
    Last edited by goBENGALS; 06-08-2007 at 09:54 AM.


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Your setup is fine that is stock. I drilled and taped the water bar to feed the stingers.

  3. #3
    Banned User
    Join Date
    Aug 2006
    Posts
    1,236
    BD, did you use duct tape or masking tape.

    Sorry buddy, I'm bored.

  4. #4
    absentx's Avatar
    Join Date
    Aug 2006
    Location
    Milwaukee
    Posts
    742
    +1
    8
    I drilled and tapped the water manifold as well.

    Now, your tee fitting is probably fine, but when I was rebuilding mine, I unclamped the hoses at the tee fitting and checked it out....the WHOLE thing was clogged with some melted plastic piece (Assuming old thermostat)

    Thats probably why my boat fried up with the previous owner. I guess if your going to use the stock set up, I would just make sure that tee fitting is clear, or at least you have good flow through the whole system.

  5. #5
    What would life be without a PWC?........ goBENGALS's Avatar
    Join Date
    Apr 2007
    Location
    Clearwater, FL
    Posts
    103
    Thanks absentx, I was actually wondering about that tee fitting but yesterday I purged the whole cooling system including the pipes.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replacing the water lines to EMM on Virage TXi
    By macdoo in forum Polaris Open Discussion
    Replies: 0
    Last Post: 06-23-2013, 08:23 AM
  2. Insulated pump to IC water line ?
    By Kinchyle in forum 4-Tec Performance
    Replies: 8
    Last Post: 08-21-2006, 09:04 AM
  3. Gallon per Minute/Hour of cooling water line
    By Kinchyle in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-01-2006, 03:50 PM
  4. Clog up water line to manifold
    By Kinchyle in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-30-2006, 08:59 PM
  5. Replies: 25
    Last Post: 06-18-2006, 11:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •