Results 1 to 7 of 7
  1. #1

    Join Date
    Aug 2006
    Location
    Iowa
    Posts
    1,028
    +1
    2

    785 ADA head install??

    Installing an ADA head set-up on my Pro and wondered about a couple of things.

    I've already got 3 pissers I can use for each cylinder. Should I use these, or use the collector that ADA sends with the kit??? And, If I go to the individual pisser way......Do I need to worry about any cooling issues?


    I will be installing the 92 octane domes, and will be blending pump fuel with race fuel. Does anyone have any jetting specs for me to start with for the head?

    Can I get by with the adjusters or will I need to install different jets?


  2. #2
    www.springbreak-florida.com rgard32's Avatar
    Join Date
    Dec 2006
    Location
    Saint Petersburg,Florida
    Posts
    665
    curious why do u have to run race gas with 92 octane domes??

  3. #3

    Join Date
    Aug 2006
    Location
    Iowa
    Posts
    1,028
    +1
    2
    I have to blend pump fuel with race fuel here to get 92 octane. Most all of our premium fuels in Iowa have Ethanol blend in them now.........which shouldn't be run in a watercraft.

  4. #4
    www.springbreak-florida.com rgard32's Avatar
    Join Date
    Dec 2006
    Location
    Saint Petersburg,Florida
    Posts
    665
    ahhhh ok ok gotcha...

  5. #5

    Join Date
    Aug 2006
    Location
    Iowa
    Posts
    1,028
    +1
    2
    OH forgot......

    Whats everyone do for the temp sensor with installation of a head?????

    I would either like to have the sensor or install a temp gauge so I know how warm she's running.

    If I can't use my temp sensor, what should I get for a temp sensor.


  6. #6
    I have an ADA head on my limited race ski. I run the cooling line from each cylinder to one hose out the back where the original bilge pump outlet was. If you do it right, you will not have to worry about temps.

  7. #7

    Join Date
    Aug 2006
    Location
    Iowa
    Posts
    1,028
    +1
    2
    Quote Originally Posted by racer114 View Post
    I have an ADA head on my limited race ski. I run the cooling line from each cylinder to one hose out the back where the original bilge pump outlet was. If you do it right, you will not have to worry about temps.

    Yeah, what gets me worried is my strainer plugging up. It's happend twice, and when it does, it gets hot fast.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Pro 785 ADA head
    By 785 lugs in forum Polaris Classifieds
    Replies: 6
    Last Post: 04-12-2012, 03:23 PM
  2. Replies: 4
    Last Post: 10-31-2011, 06:36 PM
  3. FS 785 ADA Heads
    By 785 lugs in forum Polaris Classifieds
    Replies: 3
    Last Post: 01-22-2010, 03:39 PM
  4. ADA Head PRO 785
    By beerdart in forum Polaris PWC Performance
    Replies: 13
    Last Post: 04-23-2007, 05:03 PM
  5. Riva Head Installation question
    By howestek in forum Yamaha PWC Performance (2-stroke)
    Replies: 28
    Last Post: 03-04-2007, 08:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •