Thread: 785 on a 780
06-13-2007, 07:22 PM #1
785 on a 780
I have a 780 and i was wondering what parts from a 785 could i put on mine that will help my top speed?
like the carbs? they are 36mm on the 780 and 44mm on the 785 would they just bolt right on in place of the 36mm?, what about the stator? would it be worth $180 for a stock 785 stator?
and one last question i found a TDR waterbox for a sea-doo cheaply (about $75) and is there a way i could get that to fit my 780?
ooh sorry ok this is my last question what other parts should i look at for a higher top speed? stuff thats not too hard to do b/c Im fairly new with pwcs and dont wanna start something I cant finish.
Last edited by jsc7002; 06-13-2007 at 08:18 PM.
06-13-2007, 07:33 PM #2
The best speed mod you could do is get the 785 running!!!!! 62+ MPH Adding larger carbs to the 780 will not make it faster with out the cdi and pipes to use the HP at the higher RPM's. What is wrong with the 785? Is it just the engine or do you have the hole boat?
06-13-2007, 07:48 PM #3
06-13-2007, 08:19 PM #4
aah sorry I wasnt paying attention I meant to say I have a 780 but have found 785 parts. Ive fixed it now sorry
06-14-2007, 05:08 AM #5
Yes, you can use the carbs, but you will neet the Pro intake mianifold, and reed cages. Small gain.
06-14-2007, 05:10 AM #6
Wich stator are you talking about, the jet pump stator or the eletrical stator? As far as I know they are both the same as the 780, no gains.
06-14-2007, 10:43 AM #7
- Join Date
- Aug 2006
By the way you have 38 mm Mikuni SBN's
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By JGringo in forum Polaris Open DiscussionReplies: 4Last Post: 07-16-2008, 10:33 PM
By Chad in forum Polaris PWC PerformanceReplies: 12Last Post: 07-13-2008, 04:46 AM
By starflight in forum Polaris Open DiscussionReplies: 20Last Post: 11-18-2007, 03:45 AM
By K447 in forum Polaris Tech Tips and InfoReplies: 1Last Post: 10-15-2007, 01:42 PM
By KEYZBUM in forum Polaris PWC PerformanceReplies: 10Last Post: 04-20-2007, 11:56 PM