Results 1 to 4 of 4
  1. #1

    Join Date
    Jun 2007
    Location
    Mt.prospect IL
    Posts
    92

    07 RXp I Need Help!!!!!

    ok guys heres the situation the other day i launched my 07 RXP and the launch was really weird and water was alomst going to go into the trunk so i had to give it some throttle in reverse to get it off the trailer and sucked up a rock ..... not knowing what to do i thought it might spit it out and it dident the klunking got worse pulled it out of the water fished the rock out of the grate and now i can see chips and dents in the impeller or prop thing ...... now when ever i open the throttle from a stand still it doesnt pull very hard and makes a weird not good noise .........like its spinning but not goinng any where .........it eventually gets up to regular top speed but the power down low is very weak ...........plase let me no what u guys think ??????


  2. #2

    Join Date
    Jun 2006
    Location
    toronto
    Posts
    965
    Probably need a new wear ring, and hopefully not a new prop also.

  3. #3

    Join Date
    Jul 2005
    Location
    euxton nr chorley lancashire, england
    Posts
    1,500
    +1
    1
    Quote Originally Posted by psi_2_high View Post
    ok guys heres the situation the other day i launched my 07 RXP and the launch was really weird and water was alomst going to go into the trunk so i had to give it some throttle in reverse to get it off the trailer and sucked up a rock ..... not knowing what to do i thought it might spit it out and it dident the klunking got worse pulled it out of the water fished the rock out of the grate and now i can see chips and dents in the impeller or prop thing ...... now when ever i open the throttle from a stand still it doesnt pull very hard and makes a weird not good noise .........like its spinning but not goinng any where .........it eventually gets up to regular top speed but the power down low is very weak ...........plase let me no what u guys think ??????
    prop and wear ring is what you need

  4. #4
    Banned User
    Join Date
    Jul 2006
    Location
    Ft.Lauderdale
    Posts
    3,237
    You can get the prop re-worked but a wear ring is a must. Install the SS wear ring while your there.
    Use the frezer trick to get the wear ring out and it's a breeze.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Looks like I goy a bad 07 RXP, I need some help.
    By jasen 2007 in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 07-24-2012, 10:22 AM
  2. RXP-X Needs Help
    By Malone in forum Sea Doo Open Discussion
    Replies: 26
    Last Post: 06-02-2009, 05:16 PM
  3. Buying RXP tomorrow need HELP FAST!
    By transhow in forum 4-Tec Performance
    Replies: 19
    Last Post: 12-31-2008, 10:26 PM
  4. 04 RXP issues. Need helpful info.
    By 04RXP22 in forum 4-Tec Performance
    Replies: 33
    Last Post: 04-04-2008, 06:14 PM
  5. My 2 RXP's need HELP!
    By Tube Master in forum 4-Tec Performance
    Replies: 21
    Last Post: 07-19-2005, 09:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •