Results 1 to 6 of 6
  1. #1

    Join Date
    Jun 2007
    Location
    Texas
    Posts
    46

    94 SL 750 just purchased what should i check?

    Ok this is going to be a long story so bare with me...
    I purchased this 94 SL 750 from my brother with trailer for $200 he has had it for 3 1/2 years and never got it running correctly (he hasnt tried anything but adding gas and chargin battery) so i got it and found out the starter bendix was locked up so i removed and replaced the old with a new e-bay one put it back togethere dropped it into the boat and tried to fire it up but the rear carb (closest to the rear of the pwc) was spittin gas about 2 foot out of the jetski (no intake cover on it yet) and if i placed my hand over that carb it would stay running if i removed it it would die pretty soon after .... Ok so heres the whole point of this story... what do i want to check do i want to pull the heads off and look at the pistons or what ?????? um im thinking i wanna remove the oil tank and run premix someone mind walking me through how i go about that ???? I also plan on putting in a 3 line fuel pump were would i get one for a good price ?????


  2. #2
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Welcome Demon. It sounds like a reed issue with the gas spitting out the carb. If the ski has sat for that long, you should prob. rebuild the carbs and address the reed issue while the carbs are off.Oil pump block offs are straight forward to do. Remove the pump, install a plug in the gear's place, and block it with the plate using sealant. Then cap off all oil lines and fittings, then address the sending unit. Triple pumps can be had almost anywhere that sells ski parts. Take the time and replace all the fuel hoses as well.

  3. #3

    Join Date
    Jun 2007
    Location
    Texas
    Posts
    46
    Ok im a COMPLETE noob to motors mind telling me how to get to my reeds or a link to a log or something?
    Weres the best place to find a rebuild kit for a fair price?
    were do i get the Plug and Block plate for the Oil Setup?
    weres a good place to get the triple pump im new into ski parts so im clueless
    and im bidding on some Clear Fuel Line on ebay

  4. #4

    Join Date
    Jun 2007
    Location
    Texas
    Posts
    46
    bump

  5. #5
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Quote Originally Posted by GameDemon View Post
    Ok im a COMPLETE noob to motors mind telling me how to get to my reeds or a link to a log or something?
    Go to the tech section and grab the service manual, I think chapters 5 and 6 have the carb R&R procedures.
    Maybe get a good manual off e-bay or buy a new one?

    Weres the best place to find a rebuild kit for a fair price?
    Jay at AtlanticPowersports
    Randy at Watcon
    John Zigler
    Jet Ski Mechanic
    Etc.
    were do i get the Plug and Block plate for the Oil Setup?
    Randy at Watcon stocks them as does Atlantic Powersports. Don't forget to ask for your Green Hulk discount.
    weres a good place to get the triple pump im new into ski parts so im clueless
    Same list as above plus e-bay.
    and im bidding on some Clear Fuel Line on ebay
    Make sure it's Taragon or better a lot of the hose on e-bay is junk.

  6. #6
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Reeds are between the intake manifold and engine block. Once you remove the carbs, the maniflod bolts are next and there are the reeds. Everything you asked about is for sale at the places PH20 mentioned, also everything is on Ebay. Most of the info you requested is on this site, just look for Fuji engine or fuel. The search function can be a wonderful thing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what kind of premix to run on a 94 sl 750
    By nickflo7 in forum Polaris How To & FAQs
    Replies: 23
    Last Post: 03-13-2013, 09:58 PM
  2. 94 SL 750 oil bypass using just the pump
    By piatkowski6 in forum Polaris Projects
    Replies: 3
    Last Post: 01-09-2013, 08:00 AM
  3. 94 sl 750 just a few more questions.
    By Fasterner in forum Polaris Open Discussion
    Replies: 5
    Last Post: 06-21-2011, 02:38 PM
  4. Just purchased, what should I need to know or do...
    By angelico in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-03-2010, 02:27 PM
  5. 94 sl 750 maintenance anyone?
    By ducatifreak152 in forum Polaris PWC Performance
    Replies: 4
    Last Post: 06-09-2007, 03:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •