Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 40
  1. #1
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176

    FS: SL 750 in NJ

    Testing the waters here. After years of struggling with her, she is finally running like a ski should. Now it's time to part ways.

    1994 SL 750

    +1mm sbt motor in 2001, new, non sbt crank in 2006. All that's sbt on this motor today are the pistons. Cases were NOT welded.
    SLX pentagon fuel pump
    Reed spacer
    Boyesen pro reeds
    Rerouted fuel hoses
    Extended pump
    Skat prop done by Island Racing
    AAT
    Primer
    Flame arrestors
    6 vein SS stator
    New fuel and oil lines
    Deka AGM battery new in 2006
    Working MFD
    Oil injected
    Partially de-stickered
    OP short plate
    R&D grate
    New hydro turf & seat cover 2006
    1mm cooling orifice jet
    Pre wired for electric bilge
    Dual drain plugs
    4* wedge
    Finger throttle
    ODI Rouge grips
    Flush kit


    I also have a whole box of spare parts, worth about $500, including:
    stock prop
    Stub shaft
    Pump bearings
    Pump stator
    Pump venturies, 1 bored to 87mm, 1 stock
    Stock extended plate
    Stock grate with 2 bars removed
    AAT shuttles
    Stock pump cone
    Assorted gaskets
    Stock reeds
    Steering nozzle
    Prop wrench
    Oil pump
    Through hull fittings- speedo, steering cable, ect.
    Short pump bolts
    OEM service manual
    A lot of assorted S/S hardware

    Consistently turns 6400 rpm’s at about 52 mph as it is set up now. The stock plate should yield at least 3 mph more. Starts easy, good compression on all 3 cylinders and runs strong.

    It is not the prettiest ski, but on par for something this age. There is no handlebar pad, some of the plastics are faded, ect. But it is a good runner and structurally sound. Pictures will be posted as soon as I buy another carmera.

    A test drive is possible, provided the full asking price is available, in cash, at the time of the test ride, and that the rider has a valid USCG boating safety certificate. No trailer, but I can help with delivery within 100 miles or so of 07647.

    NJ does not title vessels under 12 feet, but I will sign over the certificate of origin, and provide a notarized bill of sale.

    Asking $2000 OBO
    Last edited by addicted; 06-19-2007 at 10:17 AM.


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    addicted, sorry to see her go!
    Hope you stick around, your input has always been very helpful.

  3. #3
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    I would never turn my back on you guys. After all, the forums here are the reason that it's running like it should.

    Just time to move on to something a little newer.

  4. #4
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Am I asking too much? C'mon guys. I need input. running ski's have recently sold on ebay for $1200-$1500. I figure with all the extras I am asking a fair price. . .no??

  5. #5
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,328
    +1
    29
    I suppose Ebay is your best source for price evaluation. Unfortunately "goodies" don't amount to much when it comes to pricing. People just see old, cheap jetski to beat on.

  6. #6
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    here are some pics that I snapped in the rain
    Last edited by addicted; 03-18-2009 at 08:03 AM.

  7. #7
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    $1500 OBO without all the extra stuff, but including the cover.

  8. #8
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    good luck selling!
    Last edited by HallPass; 12-18-2007 at 04:07 PM.

  9. #9
    Jug Inspector
    Join Date
    Aug 2006
    Location
    Chicago Burbs
    Posts
    552
    Not to step on toes- but are you willing to sell some of the "extra parts" seperate? I know you'd like to dump them with it, but why not sell the little crap while you wait for the ski to sell?

    Brayn

  10. #10
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Hallpass, If you're like me, asking price means little more than the max you should pay. That's why OBO is in there. Best offer takes it!

    Bryan, What are you looking for ? PM me a list and an offer. We'll see if we can work something out.

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS: SL 750 Crankshaft
    By rcman989 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 10-02-2013, 07:51 AM
  2. FS lots of Polaris SL 750 parts for sale
    By jarcynvicnchris93 in forum Polaris Classifieds
    Replies: 26
    Last Post: 06-02-2011, 07:59 PM
  3. Price drop: Fs sl 750, slx 780 carbs w/ ocean pro flame arrestors
    By cubsfan2516 in forum Polaris Classifieds
    Replies: 1
    Last Post: 02-15-2009, 03:11 PM
  4. FS IR BUILT GP1200R in NJ
    By y2grey in forum Yamaha Classifieds
    Replies: 28
    Last Post: 07-15-2008, 09:20 AM
  5. Largest Drop-in Engine in SL 750 Hull possible?
    By JGringo in forum Polaris PWC Performance
    Replies: 7
    Last Post: 08-23-2007, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •