06-19-2007, 03:22 PM #1
Free Samples of Corrosion Preventive
Green Hulk members, if you haven't tried Fluid Film and live within the Continental United States, pm me for a free sample of Fluid Film.
With no solvent content and a unique lanolin base, Fluid Film will protect from salt-water corrosion like no other product. It also remains super slick, also making it an excellent lubricant.
I'll run this for as long as I can, but I'd recommend getting in early. We won't keep your info or put you on a list. This is just the best way we know to introduce a superior quality product to its intended audience.
For more info, check out our website at www.eurekafluidfilm.com.
06-19-2007, 04:44 PM #2
is the product clear and oily or yellow and waxy???
does it wash off eventually or dry up and cake on, like a waxy buildup?
that isnt necessarily a bad thing in salt conditions to have permanent layer, as long as it can be cleaned off when necessary...
06-20-2007, 11:21 AM #3
The woolwax (lanolin) base actually imbeds into the pores of the metal, so the more you use it, the longer it will last.
06-20-2007, 11:30 AM #4
Does it stain like Boesheild T9 when subjected to the heat of an engine compartment?
06-20-2007, 11:32 AM #5
Guys, this is a VERY good product. I got my free sample and will be buying more.
It has not stained anything on either of my skis.
The only complaint I have is the smell of the product.
06-20-2007, 12:58 PM #6
could we put this in our intercoolers' waterlines??
06-21-2007, 09:05 AM #7
06-21-2007, 10:51 AM #8
- Join Date
- Apr 2006
- panama city beach 'fl
get with woody (lanolin) is made from sheep ,he with most likely buy 55gal drum!
07-17-2007, 12:03 PM #9
We've still got samples of Fluid Film for any members who haven't tried it yet. Just pm me your shipping info and I'll get a can right out!
07-17-2007, 12:10 PM #10
been reading good things about this from the other forum. If they have positive results over there, then there has to be some merrit, cause thats the most negative place on the web..
you've got pm...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RonJon in forum Kawasaki How To & FAQsReplies: 30Last Post: 08-08-2011, 11:31 PM
By RonJon in forum Kawasaki PWC Performance (4-stroke)Replies: 32Last Post: 08-08-2011, 11:31 PM
By joyofFluidFilm in forum Sea Doo Open DiscussionReplies: 35Last Post: 02-25-2009, 04:14 PM
By crashhard in forum Yamaha ClassifiedsReplies: 2Last Post: 11-01-2008, 08:50 PM
By Ultra250XRider in forum Kawasaki PWC Performance (4-stroke)Replies: 9Last Post: 08-15-2007, 12:28 AM