06-20-2007, 11:03 PM #1
- Join Date
- May 2007
- Lincoln, Ne
Instructions for PPG Power Pipe install?
Does anyone know if there are instructions around on how to install a power pipe on an RXP? Its used so there won't be any included. I read the Riva Free Flow instructions but im not sure if there are extra steps to take with a whole pipe. Thanks.
06-20-2007, 11:16 PM #2
What are you having trouble on, removing the stock exhaust? Or putting the actual power pipe in place?
06-20-2007, 11:28 PM #3
Just remove the stock exhaust & resonator. Moving the throttle body out of the way is the easiest I've found. Thanx RXP steve
You might have to losen the J pipe & turn the water box a little to get it to line up. Use your OEM exit hose that the resonator was connected to.
06-21-2007, 07:40 AM #4
then go ahead and just send that old resonator down here...you won't need it anymore
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ModularJunk in forum Sea Doo ClassifiedsReplies: 8Last Post: 09-30-2008, 10:40 PM
By ModularJunk in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-24-2008, 03:29 PM
By ModularJunk in forum 4-Tec PerformanceReplies: 0Last Post: 07-15-2008, 08:45 PM
By yellow4 in forum 4-Tec PerformanceReplies: 13Last Post: 07-03-2007, 11:03 AM
By Therock in forum 4-Tec PerformanceReplies: 10Last Post: 05-22-2005, 01:54 PM