Results 1 to 3 of 3

Thread: Cavitation

  1. #1


    Is there a realible way to reduce or eliminate the cavitation on the R12x after a spin out or from the hole shot! Very frustrating!

    TOP SPEED: GPS (Stock): 58.2mph
    2004 R12x

  2. #2
    Bob 1tommygunner1927's Avatar
    Join Date
    Apr 2007
    Houston, Texas
    Feather the throttle slightly and lean on the bars. Also, your top speed seems low.....should be about 61-62. Check the oil level, might be over filled, and run 93 octane.
    Last edited by 1tommygunner1927; 06-21-2007 at 09:56 PM.

  3. #3
    Like a chimp with a ball-peen hammer smackwave's Avatar
    Join Date
    Dec 2005
    Annapolis, MD
    With that top speed and the cavitation problem I'd seriously check out your prop and wear ring. I'm thinking one or both are damaged from sucking something into the pump.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Prop boot and cavitation
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 01-28-2011, 08:09 PM
  2. Cavitation help
    By mattpm07 in forum Sea Doo Open Discussion
    Replies: 13
    Last Post: 05-05-2006, 01:34 PM
  3. R&D Anti Cavitation Cone
    By Kinchyle in forum 4-Tec Performance
    Replies: 9
    Last Post: 05-02-2006, 10:46 AM
  4. Cavitation issue: worried
    By BDNJ in forum 4-Tec Performance
    Replies: 62
    Last Post: 09-13-2005, 08:21 AM
  5. Post on cavitation
    By Kinchyle in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 08-04-2005, 10:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts