Thread: too much bounce on my RXT
06-28-2007, 12:01 PM #1
too much bounce on my RXT
I removed the OPAS and have a wedge installed. The Front of my ski is bouncing too much even at WOT and going across a little ripple. It seemed like it stayed down and hooked before my mods.
Still waiting for my RE block offs.
There was someone (sorry I forget your name, you had your son with you)at the shipbottom ride with an RXT. It seemed you didn't have as much bounce as my ski. Do you have a Wedge and is your OPAS removed?
just a lil video from shipbottom
06-28-2007, 12:14 PM #2
What wedge are running 2 or 2.5 degree? My RXT with the 2 degree doesn't bounce until 69mph. My GTXSC had a 2.5 and it would bounce depending on fuel/storage load.
06-28-2007, 12:22 PM #3
It's the 2 degree that came with the Riva Stage I kit
06-28-2007, 01:09 PM #4
Too Much Bounce Try Downey LOL
06-28-2007, 01:25 PM #5
06-28-2007, 01:48 PM #6
Same problem here. I took off the wedge as it was not really doing anything positive until I got the RE's. Wedge is back on with the RE's and no bounce...
06-28-2007, 05:01 PM #7
The bounce on my RXT when I installed the wedge but before the RE was bad, I smacked my forehead a few too many times on the steering pad. But the REs fixed the problem and could not be happier.
06-28-2007, 10:33 PM #8
if the hole in offset bushing in the steering nozzle is not toward the rear of the ski, turn it around.
07-01-2007, 01:18 AM #9
07-02-2007, 06:31 PM #10
Sorry for the stupid question guys, i am new to this, but what are the "re" you are talking about.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By apples99 in forum 4-Tec PerformanceReplies: 6Last Post: 10-24-2011, 09:39 PM
By Whiplash in forum Kawasaki PWC Performance (4-stroke)Replies: 23Last Post: 06-03-2007, 01:11 PM
By fazznick in forum Sea Doo Open DiscussionReplies: 23Last Post: 04-13-2007, 11:13 PM
By yamaslut in forum Open DiscussionReplies: 12Last Post: 09-21-2006, 06:15 PM
By spdracr in forum Yamaha Open DiscussionReplies: 0Last Post: 06-17-2006, 12:04 PM