Thread: Bad plug wire?
07-02-2007, 07:48 PM #1
Bad plug wire?
1200 Genesis w/ no spark condition turned out to be weak batt. After going thru the domestic T/S guide we found the mag plug wire had a resistance of 1.6 Meg ohms. other two wires were about 5K ohm. How do you change these wires and where can I get one?
07-03-2007, 08:54 AM #2
The early Polaris twins & triples, SL-900-1050, etc have plug wires that can be "unscrewed" from the coil pack. The newer updated twin & triple coils will pull right out of the coil and are held in with a snap-ring internally. The "Fuji" coils do not have removable wires. 650-750-780-785 Pro. If you need Fuji coils, I have a ton in stock & will sell them for $25.00 per coil.
Please visit www.watcon.com
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Rodneyae in forum Polaris How To & FAQsReplies: 5Last Post: 02-13-2007, 11:54 AM
By qbzonk in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 09-04-2006, 11:27 PM
By danvhp in forum Polaris How To & FAQsReplies: 16Last Post: 09-04-2006, 08:31 PM
By philip_gpr in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 08-18-2006, 12:52 AM
By sbogi in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 05-10-2006, 10:39 PM