07-06-2007, 07:56 AM #1
How to remove/install injectors...?
I could not find a how-to on this so I need your help guys.
07-06-2007, 08:03 AM #2
easy, take the two e-torx bolts off the rail then wiggle and pull very carefully not to rip o-rings till rail is off. then the fuel injector wire plug is a push type, push in the chrome thingy and pull the connector off, next there shoudl be a black clip holding it to the rail. small plyers i pull the clip off and then the injector will pull off, be carefull of the fuel you will spill on your hands. dont worry it will evaporate. reverse the process and just make sure you dont loose the black clip and its in the injector slots and rail slots correctly holding the injector in place.
07-06-2007, 08:03 AM #3
use the riva instructions in reverse. go to rivas website and go to the pull down menu in the top left coner of the page, instructions will be in there.
07-06-2007, 08:05 AM #4
HAve some old rags or towels available. place them under the fuel rail PRIOR to pulling it apart. Smoking during this operation is not recommended...
07-06-2007, 08:15 AM #5
hey geo... just use the riva instructions... i did these myself 2 days ago and wasnt that bad... i think the hardest part of the whole thing is to get the new injectors in cus of the new o-ring
07-06-2007, 08:22 AM #6
- Join Date
- Aug 2005
- Jerry's guest bedroom
Breaking News: Flames seen shooting out of Miami garage. Parrot with burnt tail feathers seen fleeing scene.
07-06-2007, 08:24 AM #7
You can put some lube on the o-rings prior to install to help them slide in. You can use what ever you have. Motor oil, grease, cooking oil, vasoline. Just use a little bit-just enought to coat the o-ring. I done that anytime i pull injectors out when i'm working on cars. Lube is good, Dry is bad.
07-06-2007, 09:03 AM #8
07-06-2007, 09:15 AM #9
NC, you're a clown man!
Thanks for the tips guys...
07-06-2007, 09:39 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By XRIDER in forum Yamaha PWC Performance (4-stroke)Replies: 22Last Post: 04-25-2010, 01:30 PM
By XRIDER in forum Yamaha Open DiscussionReplies: 1Last Post: 04-17-2010, 01:25 PM
By Mike94ZLT1 in forum Sea Doo Open DiscussionReplies: 2Last Post: 08-22-2009, 09:43 AM
By turk0004 in forum Polaris Open DiscussionReplies: 3Last Post: 08-16-2009, 08:51 PM
By Kinchyle in forum Sea Doo Open DiscussionReplies: 5Last Post: 08-02-2006, 09:23 AM