Results 1 to 6 of 6

Thread: Trim

  1. #1

    Join Date
    Jun 2007
    Location
    Bolton Landing, NY - Howard Beach, NY
    Posts
    44

    Trim

    I was experimenting with the trim today and I usually set the trim at 2 clicks above the neutral line. Where do you guys ride at?


  2. #2
    formerly Gold06RXP Turbo Nick's Avatar
    Join Date
    May 2007
    Location
    Dayton, OH
    Posts
    2,095
    +1
    97
    I ride at 1 click below neutral. But I also have a Riva pump wedge.

  3. #3

    Join Date
    Jun 2007
    Location
    Bolton Landing, NY - Howard Beach, NY
    Posts
    44
    bump anyone else?

  4. #4
    Two clicks below the highest setting. I've found that to produce the best speeds, but when I'm jjst riding around and want better hook up and turning I ride with it all the way down or just above the lowest setting.

  5. #5
    .... RXPwildchild's Avatar
    Join Date
    Jun 2007
    Location
    Wake Forest, NC
    Posts
    239
    +1
    1
    Person opinion (with stage one kit minus pump wedge)

    I like the higher speed handling with it trimmed 1-2 ticks below maximum up. It produces a smooth slide.

    For speed, I have received the best results with the trim 1 tick above neutral (145lb rider).

  6. #6

    Join Date
    Jun 2006
    Location
    toronto
    Posts
    965
    Speed equals two or three below maximum up
    Turns equals all the way down or one up from bottom
    In waves above three feet speed equals even, and turns three from bottom.
    All of this will be solved soon for me with a butler trim set-up (manual hand trim set to two below trim up.)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best rider and trim position...
    By rx4pain in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 11-24-2008, 08:42 AM
  2. R&D Auto Trim Kit
    By 01xdime in forum 4-Tec Performance
    Replies: 19
    Last Post: 12-16-2005, 08:16 AM
  3. Trim tabs and removing stock speedo
    By 01xdime in forum 4-Tec Performance
    Replies: 0
    Last Post: 11-12-2005, 10:13 PM
  4. M-Line Seat or Jet Trim photos (RXP)
    By Fast-XPL in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-24-2005, 04:04 PM
  5. Where should trim be with riva stage one kit
    By macattack in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-30-2005, 09:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •