Thread: Pet-2100 DX & RXP
07-09-2007, 02:05 PM #1
Pet-2100 DX & RXP
I have a customer with RXP, and he is attempting to monitor Rpm with no luck... Has anybody had results with this?
Does the RXP have the coils mounted directly on the spark plugs??
Sorry for my ignorance, but I have no RXP experience.
Thanks for your input,
07-09-2007, 03:01 PM #2
07-09-2007, 03:40 PM #3
I had to set it up as a single cylinder 4 stroke and then run the lead wire wrapped around one coil (can't do all three at a time) all the way down the coil and actually run the lead into the opening for the plug tip to get it to read properly...
I ended up running all 3 cylinders seperate just to verify I was happy with my readings from any one cylinder individually...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By davesgpr in forum Yamaha PWC Performance (2-stroke)Replies: 15Last Post: 05-31-2007, 01:22 PM
By Hydrotherapy in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 01-10-2007, 04:28 AM
By TheDome in forum Sea Doo How To & FAQsReplies: 6Last Post: 11-27-2006, 03:01 PM
By mtrager in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 09-05-2006, 06:01 PM
By jgustman in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 06-15-2006, 03:46 PM