Results 1 to 3 of 3

Thread: stuck pump bolt

  1. #1
    89 burban's Avatar
    Join Date
    May 2006
    Location
    killingworth, CT
    Posts
    38

    stuck pump bolt

    on the back of the gp looking forward

    i found one of the four bolts that holds the wear ring housing onto the hull backed out roughly two to three turns....so i took off the ride plate and found that the bolt seems to be siezed, and i am not sure why. I cannot tighten it or loosen to take it out........i probably could but i am too scared to strip what is on the other side since the bolt is not visable from the inside of the hull. any suggestions? should i leave it or try to fix it?

    I was only using a 3/8" ratchet with a 8" extension what can this bolt/hull take for torque without stripping the nut in the hull?


    here is a pic attached

    thanks
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	partimage.gif 
Views:	54 
Size:	24.2 KB 
ID:	31164  
    Last edited by 89 burban; 07-11-2007 at 07:39 PM. Reason: because


  2. #2

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    you can try some heat (don't set ski on fire please) what may happen is insert inside could start to turn ,you'll have to grap with vice grips and back out from there

    later cd

  3. #3
    89 burban's Avatar
    Join Date
    May 2006
    Location
    killingworth, CT
    Posts
    38
    i got it out finally by using pb blaster and then cleaned out the threads and it tightened back up

    thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stuck Pump and Bolts
    By Pwgsx in forum Yamaha Open Discussion
    Replies: 6
    Last Post: 09-01-2015, 09:45 AM
  2. Easy "stuck" pump removal
    By CanadianGPR in forum Yamaha How To & FAQs
    Replies: 10
    Last Post: 04-29-2007, 11:54 AM
  3. jet pump bolts
    By polarisman01 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 02-27-2007, 12:10 AM
  4. Jet Pump Bolts
    By scorp in forum Polaris Open Discussion
    Replies: 4
    Last Post: 01-17-2007, 09:56 AM
  5. Thought on pump bolts............
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 04-12-2006, 05:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •