Thread: Home Made Pump Seal Kit?
07-16-2007, 12:02 PM #1
- Join Date
- Jul 2007
Home Made Pump Seal Kit?
Are there any directions on what to do and what to use in creating a home made pump seal kit?
I want to do it on an xlt but dont really want to spen the $60 for the kit.
07-16-2007, 01:18 PM #2
- Join Date
- Jul 2006
I have used the large "rubberized" isulation that goes around water pipes from home depot and it seemed to work well with no issues. I later replaced it with the PPK but it was holding up fine. Just do a search and there used to be alot of conversations about it.
07-16-2007, 02:50 PM #3
Or you can just fill it up with silicone and let it dry. (thats a lot of silicone)
Seen closed cell foam in there too.
07-16-2007, 02:58 PM #4
Fill it with fiberglass resin... lots of hardner of course
07-16-2007, 07:05 PM #5
get a caulk tube of clear or white outdoor silicone in a caulk gun from Lowe's or Home Depot and let it dry. 5 bux a tube
07-16-2007, 08:08 PM #6
Would all the weight that all that silicone would add hurt anything? I now the plastic tabs weight nothing, but a tube or 2 of silicone would way a good bit wouldn't it?
07-16-2007, 08:15 PM #7
07-16-2007, 08:19 PM #8
07-16-2007, 08:22 PM #9
Thats what this forum is about, we got each other's back !
07-16-2007, 08:55 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By HallPass in forum Yamaha PWC Performance (2-stroke)Replies: 25Last Post: 08-28-2007, 06:48 PM
By Gj#6 in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 05-12-2007, 08:40 PM
By Chrisrokc in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 05-10-2006, 03:39 PM
By sbogi in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 04-03-2006, 03:28 AM
By CRAZEDRXP in forum 4-Tec PerformanceReplies: 31Last Post: 07-07-2005, 07:28 AM