Results 1 to 3 of 3
  1. #1
    Doo It Till It Hurts! holdnon72's Avatar
    Join Date
    Feb 2007
    South Jersey

    Trailer Bearings Please Help?

    I just finished cleaning and repacking my hubs and bearings on my karavan trailer but can't seem to get a happy medium on the bearing adjustment. Is it ok to have a little side to side play in the wheel? Or should there be no play? If I goto the text spot in the castle nut it seems to be too tight. But if I turn it back once I get the little bit of side to side wobble when I move the wheel side to side. Thanks for any info someone can give on getting the bearings adjusted properly.

  2. #2
    mr. knowitall
    Join Date
    Jul 2007
    jacksonville fl.
    yes a little play is ok just not to much. it sounds like you are in good shape , just snug it up till she starts to drag and then back off to the first hole you come to and pin it.

  3. #3

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. I hate trailers ( bearing help )
    By Pettee in forum Open Discussion
    Replies: 10
    Last Post: 01-02-2008, 05:11 PM
  2. Water Got In My Trailer wheel Bearings Please Help!
    By holdnon72 in forum Sea Doo Sport Boats
    Replies: 5
    Last Post: 03-19-2007, 09:34 PM
  3. Please Help! Aftermarket Hubs On A Karavan trailer
    By holdnon72 in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 03-19-2007, 07:34 AM
  4. Please Help! Can't remove Large Cotter Pin Karavan Trailer
    By holdnon72 in forum 4-Tec Performance
    Replies: 7
    Last Post: 03-18-2007, 09:28 PM
  5. Karavan Trailer Wheel Play? Please Help!
    By holdnon72 in forum Sea Doo Sport Boats
    Replies: 1
    Last Post: 03-17-2007, 05:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts