Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
  1. #1
    RXP in upper Michigan flnsx's Avatar
    Join Date
    May 2007
    Posts
    70

    Is this what my pump should look like?

    This is from my 04 RXP. I sucked up some BIG rocks and had to replace my impeller.

    I had to cut our the plastic fins and sand them down.

    My question is....

    Should the rubber stopper on my impeller (circled in the pics) be squished against my impeller like that?

    My ski used to go 68.8 mph and now it will only do 66.7.

    I just had the mettle washers replaced 6 hours ago.



  2. #2
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    not normal... take that off all-together or replace that POS stock one with a metal cone

  3. #3
    I had a metal one come with my solas concord impeller.
    where can you get just the metal nose cone by itself?

    does jerry sell it? Or just get it from riva?

    And does the metal nose cone from solas concord fit the stock impeller?

    I'm assuming this is a stock impeller?

  4. #4
    Tennessee's Avatar
    Join Date
    Dec 2005
    Location
    Mt. Juliet, Tn
    Posts
    502
    +1
    2
    Most dont even run a nose cone. They say it is good for about half a mph to run without it. I didnt check but did run without one.

  5. #5
    Is it just me or does the pump tunnel look like it was beat to hell also?

  6. #6
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    that's from him sanding the pump shoe fins out of there like he mentioned in his first post due to the rock damage

  7. #7
    Quote Originally Posted by Shibby1485 View Post
    that's from him sanding the pump shoe fins out of there like he mentioned in his first post due to the rock damage
    Oh geeze...my bad.

  8. #8
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,445
    +1
    650
    Looks like some one from Kawasaki did the silcone job around the pump shoe.

  9. #9
    RXP in upper Michigan flnsx's Avatar
    Join Date
    May 2007
    Posts
    70
    So if I take the nose cone off it won't do any damage?

    Why is it there in the first place?

    P.S. the flash really shows the flaws in the housing. It doesn’t look like that in normal light.

  10. #10
    formerly Gold06RXP Turbo Nick's Avatar
    Join Date
    May 2007
    Location
    Dayton, OH
    Posts
    2,095
    +1
    97
    I dont know for sure but maybe taking out those fins is causing loss of speed.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. is this a stock prop fitted to my new fxho...looks like an aftermarket
    By steve-uk in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 06-08-2013, 11:04 AM
  2. This is what super charger neglagence looks like.
    By sht4brnz in forum 4-Tec Performance
    Replies: 0
    Last Post: 09-16-2012, 03:02 PM
  3. Is This What a PV failure looks like or something else?
    By mgppilot in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-20-2011, 08:41 PM
  4. What is this on my RXP?
    By vidbuster in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 05-11-2007, 09:44 PM
  5. What I want my Jetta to look like
    By two2curupt in forum Open Discussion
    Replies: 11
    Last Post: 11-22-2006, 05:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •