Results 1 to 9 of 9
  1. #1
    just GOT TO DO IT! great lakes gpr 1200's Avatar
    Join Date
    May 2006
    Location
    muskegon michigan
    Posts
    798

    I need 50 more RPMS!

    I just went out and tested my newly done (BY IMPROS) 14/20 repitched to 15/25. (I did not take my GPS looking at Rpms no speed).
    The lake was tore up with tubes and boaters, and is a small lake. I hit 7030 rpms before running out of lake. tough getting threw all the wakes... The hole shot is real hard. I have to lean over the bars, and trim all the way up. then trim back soon as I start to roll.
    Bottom line. I need 50 more rpms. I am thinking indexing the plugs. and plugging the hole in the bottom of the seat, to see if I can generate some air psi? I am at 160 psi, does an one think higher octane (i am running 93 now) would help? may be some hull trimming ? any thoughts on this?


  2. #2
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    What nozzle are you running now? The 87 is worth 60 over the 85.

  3. #3
    just GOT TO DO IT! great lakes gpr 1200's Avatar
    Join Date
    May 2006
    Location
    muskegon michigan
    Posts
    798
    That was (is) a thought Duke. I just don't have one hanging in the garage... I am going out with RXP'N im Mich tomarrow.. to some testing water. I will know more then..

  4. #4
    just GOT TO DO IT! great lakes gpr 1200's Avatar
    Join Date
    May 2006
    Location
    muskegon michigan
    Posts
    798
    Well heat soaked she runs out 77 + mph but only at 6960 rpms so I guess it is back in the box. I guess I must of had that impeller really screwed up. But at least now Dave knows where it is. and how to tweek it in.

  5. #5
    injected2stroke's Avatar
    Join Date
    Feb 2006
    Location
    Taylor Mi.
    Posts
    255

    Nozzel

    Great lakes GPR:

    Where are you located send me an address PM. I have a nozzel you can borrow if you want to pay the shipping to try it out.
    Last edited by injected2stroke; 07-23-2007 at 07:25 AM.

  6. #6
    Impros's Avatar
    Join Date
    Apr 2006
    Location
    So Cal
    Posts
    205
    +1
    2
    Hey Tony,
    Let me know when you know it's here, and rather than paying additional to get it back fast via shipping, I'll do it the day it gets here and turn it around to you.
    So, you need 120 rpm over what the 15/25 is turning right?
    Take care
    D

  7. #7
    Quote Originally Posted by Impros View Post
    Hey Tony,
    Let me know when you know it's here, and rather than paying additional to get it back fast via shipping, I'll do it the day it gets here and turn it around to you.
    So, you need 120 rpm over what the 15/25 is turning right?
    Take care
    D
    now thats customer service!!!

    I knwo where I will be going for my next impellar!!!

  8. #8
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    Quote Originally Posted by bow tie klr View Post
    now thats customer service!!!

    I knwo where I will be going for my next impellar!!!

  9. #9
    just GOT TO DO IT! great lakes gpr 1200's Avatar
    Join Date
    May 2006
    Location
    muskegon michigan
    Posts
    798
    Quote Originally Posted by bow tie klr View Post
    now thats customer service!!!

    I knwo where I will be going for my next impellar!!!
    YES I have Nothing but GREAT Things to say about Dave. I was VERY impressed with how he tryed to tell me AS POLITLY AS POSSIBLE "well i see you have done some work to this, and I will get you taken care of. ... I told him" Dave I know I have bent the crap out of it, and I don't know what the heck i am doing.. That's why I sent it to you guys! ,,, It came back looking better than it did new.
    Thanks Dave.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. need more rpm
    By polaris333 in forum Polaris PWC Performance
    Replies: 2
    Last Post: 07-09-2016, 02:38 PM
  2. Needing more RPM's from a 2008 RXT-X 255
    By Ski Hacks MG in forum 4-Tec Performance
    Replies: 6
    Last Post: 05-25-2016, 10:58 PM
  3. Need more rpm's for stock pro-785
    By skigolfnut in forum Polaris Open Discussion
    Replies: 13
    Last Post: 05-18-2010, 11:02 AM
  4. **merged from original thread** need more rpm's
    By TILERYBOY2 in forum Yamaha PWC Performance (2-stroke)
    Replies: 136
    Last Post: 10-07-2006, 04:43 PM
  5. need more rpm's
    By TILERYBOY2 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 10-04-2006, 09:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •