07-29-2007, 07:42 PM #1
Quick question guys...??
Will/do the props from say an 2002 gp1200r fit in an 05-07..???
I think i read recently on here something about different hubs..??(can't find it now)
07-29-2007, 07:56 PM #2
2000-2004 smaller hub
2005-current larger hub
yes different hub sizes.
2000-2004 pump stator
2005-current pump stator
07-29-2007, 08:01 PM #3
But do they fit/work...
Can't remember what it was i was reading, only remember something about the hub..??
So if they don't fit, it'll be a different drive shaft also to use an 05-07 pump..??
Or is it just the outer hub that's different..?? i.e thicker..!! (like me )
Thanks for the swift reply Billy..
07-29-2007, 08:05 PM #4
Those pictures weren't up there two minutes ago..!!
Whats going on with my computer..??
Or are you playing tricks on me..??
07-29-2007, 08:10 PM #5
different hub size on both the impeller and stator section
the Solas Dynalfy should only be used iwht the HO [larger] pump stator
the Solas Concorde should only be used with the earlier style 66V pump stator
07-29-2007, 08:14 PM #6
So to clarify.. when using an 05 and up pump.!
You're limited to a solas dynafly as an upgrade..??
This seems slightly odd..
07-29-2007, 08:16 PM #7
07-30-2007, 12:40 AM #8
you can use the old style prop with the new pump, but it would be best to use the DF.
I used a concord for about a year with the 05 pump. it works, but there is a little step between the prop and the pump.
it will work, if you don't have the money right now to get a new prop.
07-30-2007, 01:12 AM #9
Above the second picture it says 03-current stator. I believe it should say 05-current shouldn't it? Pris
07-30-2007, 08:22 AM #10
Here's the reason for my question..
I've just bought myself an 05 GP1300R..!! (WTF do you need 3 jetskis for..??)(sound familiar guys..??)
Sooooo.. the 02 gp1200r is going back to completely stock..!!! and getting sold..!!
Which leaves me with a 13/19 and 14/20 concorde props..
Now i'll most likely sell these and use that money to finance a dynafly..
In the mean time i was wondering if the Concorde's could be used with the HO Pump..??
So Flyboy what was the performance like when you were using a concorde..??
My thinking is that i've read all about a stock motor not being able to turn a D/F..
I can't be arsed pulling pumps on and off trying to get it right..
That's the REASON the 12 is outta here i'm fed up pulling carbs on and off.. GRRrrrrrrr total PITA...!!!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By nitro rxp in forum 4-Tec PerformanceReplies: 23Last Post: 12-17-2007, 10:31 AM
By nitro rxp in forum 4-Tec PerformanceReplies: 3Last Post: 06-08-2005, 09:54 PM
By 05rxt in forum 4-Tec PerformanceReplies: 17Last Post: 06-08-2005, 07:07 AM
By UFO-RXT in forum 4-Tec PerformanceReplies: 5Last Post: 06-05-2005, 12:21 AM
By Phil in forum 4-Tec PerformanceReplies: 51Last Post: 05-26-2005, 12:16 PM