Thread: Minor Hull Repair??
07-29-2007, 08:29 PM #1
- Join Date
- Jul 2007
Minor Hull Repair??
Today while I was out on the last I had some issues with rocks
None of the damage penetrated the hull, it just broke off some of the outer white "coating". I can now see the figerglass mesh. None of the spots are bigger than the size of a quarter and most are on the "raised" parts of the bottom.
My question is, what should I do to fix this? Can I do it myself or should I take it to a dealer/repair place?
Thanks in advance for all help.
07-30-2007, 01:01 PM #2
Marine-tex..... break off any loose chips, mix up some marine-tex and fill the void, let it sit about an hour or so and go back with a wet finger and smooth it all out, wait 24 hours and wet sand with 600 will look great, done several chips in my ultra 150's..
07-31-2007, 10:36 PM #3
What if nothing was done? Would this eventually ruin the fiberglass underneath?
08-10-2007, 06:45 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By noshowallgo in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 05-17-2013, 12:28 AM
By sleaves in forum Jersey RidersReplies: 16Last Post: 10-13-2008, 10:06 AM
By stingray152003 in forum Yamaha Open DiscussionReplies: 15Last Post: 02-01-2008, 07:52 AM
By spaceman in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 02-24-2007, 08:29 AM
By Red Devil in forum 4-Tec PerformanceReplies: 4Last Post: 06-29-2005, 03:37 PM