08-06-2007, 05:22 PM #1
how to hook up oil gauge to check oil level
Hello i have a 2007 gp1300R i was wondering on how i can hook an oil level gauge so i can check the oil level.. thsnk you
08-06-2007, 07:29 PM #2
Hey there Partner..
Welcome to the G-HULK..
Is this a genuine request..???
Firstly there's NO oil to measure..!! (in the sump.. there's No sump)
Through if you mean in the 2stroke oil reservoir,
Then there's the low oil buzzer in the multi function display..??
But if you were wanting to say add an oil level gauge..??
The best place to site it would be in the blanking plug on the opposite side to the oil filler..!!
SO you need to down load these:.http://www.ramnj.com/GP1300R.pdf
Plus this one for 05 and up:.http://www.ramnj.com/GP1300R_2005_Su...tal_Manual.pdf
Then scan down to page 49, on the 05 supplement for the wiring.
Then you're good to go..
08-06-2007, 10:32 PM #3
mike, how is your guy liking the new ski???
i basically just do a viual on mine before i take it out.
pull out the front bucket under the hood, and take the seat off, that will give you enought light that you can visually see the oil level in the tank right in front of the big u pipe
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Maher Mighty in forum Yamaha How To & FAQsReplies: 6Last Post: 02-06-2012, 02:57 PM
By K447 in forum Polaris How To & FAQsReplies: 1Last Post: 07-06-2010, 08:44 AM
By pastordug in forum Polaris How To & FAQsReplies: 10Last Post: 08-14-2009, 10:18 PM
By txgp1300r in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 09-10-2007, 08:16 AM
By GeoRXT in forum Sea Doo Open DiscussionReplies: 6Last Post: 05-11-2007, 10:54 AM