Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Therock's Avatar
    Join Date
    Apr 2005
    Location
    Jacksonville,FL
    Posts
    170

    Gator Grip install.. What type of glue do i use?????

    Gator Grip install.. What type of glue do i use????? I recvd them from PPG and no glue.. Where and what should i use..Thanks for any suggestions.


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,995
    +1
    1,902


    accept no substitutes... this is the best hands down!!!

    You can get it at Home Depot / Lowes

  3. #3

    Join Date
    May 2005
    Location
    Baton Rouge, LA
    Posts
    12
    Yep, that's what I used too. It works great. Use a cheap paintbrush to apply it.

  4. #4

    Join Date
    May 2005
    Location
    Atlanta, GA
    Posts
    20
    Ohh, the gel. Less is more with that stuff. If using the gel, i would only apply it to the mat, not to the hull. If using the regular stuff, I would put a thin coat on both.

  5. #5

    Join Date
    May 2005
    Location
    Atlanta, GA
    Posts
    20
    Let it become slightly tacky before you place the mat on the hull. And remember once it's down, it's down!

  6. #6
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    NO DOUBT DAP

  7. #7
    Therock's Avatar
    Join Date
    Apr 2005
    Location
    Jacksonville,FL
    Posts
    170
    U guys rock.. Where else can u go post something and have the answers on a sunday evening at 10:45 at night.. Jerry, thanks again for this site.. Even got a pic.. U should charge for this stuff.. Just kiddin cause after my mods i wouldn't be able to subscribe.LOL Thanks again.

  8. #8
    Therock's Avatar
    Join Date
    Apr 2005
    Location
    Jacksonville,FL
    Posts
    170
    What's the trick in getting them off?

  9. #9
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    a smallllllllllll hammer /mallet and a chisel .... light tapping on each dow they will come rite off

  10. #10
    CRAZEDRXP's Avatar
    Join Date
    Apr 2005
    Location
    PHILADELPHIA
    Posts
    843
    then use the tape so its even
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	rxp_taped_up_181.jpg 
Views:	160 
Size:	267.6 KB 
ID:	132  

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What type of oil do you use?
    By jhm1138 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 21
    Last Post: 05-13-2013, 06:26 PM
  2. What type of product do ypu use to clean up your oxidized hull
    By Fandini in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 06-30-2010, 01:16 AM
  3. what type of gas lines to use?
    By skidooosl in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 07-14-2008, 08:55 PM
  4. What type of oil should I use?
    By SideFX in forum Polaris Open Discussion
    Replies: 3
    Last Post: 04-20-2008, 09:48 AM
  5. What type of Oil do you use in your 4TEC?
    By UaVaj in forum Sea Doo Open Discussion
    Replies: 17
    Last Post: 09-05-2007, 11:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •