Results 1 to 7 of 7
  1. #1

    rear main crank seal

    I ordered 2 rear mail seals for my polaris 1050 motor and i have gotten both of them and they do not fit onto the crank in the rear. It looks like the seal is too big for the crank.. I just replaced the crank with an SBT crank and i dont know if the seal should fit snug onto the crank of not i would hate to get it all together and find out i got the wrong stuff. Any help would be great i will post pics if you need them i cant seem to find my cord but i will keep looking. Thanks


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    fstroke, WELCOME tothe Green Hulk Forums.

    Call and ask them what the part number should be for your application and then verify it's what you're holding in your hand.
    They've been know to send wrong parts.
    A picture would certainly help.
    Are you checking the seal size to the shoulder of the crank where it will ride once assembled?

  3. #3
    www.springbreak-florida.com rgard32's Avatar
    Join Date
    Dec 2006
    Location
    Saint Petersburg,Florida
    Posts
    665
    also If you dont have the rear crankshaft collar on the crank...the seals will appear to be to big....

  4. #4
    rgards correct you might not have #16 in place

  5. #5
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Z it is a domestic motor but same setup.

  6. #6
    Yeah i dont have the crank collar i didn't tear this motor down and i am trying to piece everything back together thanks for the help guys......

  7. #7
    www.springbreak-florida.com rgard32's Avatar
    Join Date
    Dec 2006
    Location
    Saint Petersburg,Florida
    Posts
    665
    no prob....make sure you put an O-ring in front of the collar..when u put it on...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is this rear crank seal correct on my 1200?
    By bgaidan in forum Polaris Open Discussion
    Replies: 21
    Last Post: 03-15-2010, 01:53 PM
  2. crank seals and main
    By justfun in forum Polaris Open Discussion
    Replies: 2
    Last Post: 02-06-2010, 10:41 PM
  3. 1100 rear crank seal replacement ?
    By Screamin'SLX in forum Yamaha Open Discussion
    Replies: 1
    Last Post: 09-02-2008, 09:17 AM
  4. SLTX 1050 rear crank seal
    By bmill in forum Polaris Open Discussion
    Replies: 1
    Last Post: 10-24-2007, 10:42 PM
  5. rear main engine seal
    By nonvtecdaturbo in forum Polaris Open Discussion
    Replies: 12
    Last Post: 04-18-2007, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •