Thread: 95 slt 750 seal/bearing
08-11-2007, 04:10 PM #1
- Join Date
- Jul 2007
95 slt 750 seal/bearing
I tried to take the nozzle off to get to the driveshaft and got the bolts out but couldnt get the nozzle to come off. I dont know if I missed something or if it is just froze. any guesses on how to separate? Also, are there any other seals or tools required to pull the driveshaft and put it back? I bought a used seal/bearing on Ebay for 25.00. I wont be able to get it replaced before we go camping Sunday. If I keep it greased, will this cause any other damage? Its leaking but when I grease it the leak stops, when I run it, it starts again.
08-11-2007, 04:25 PM #2
Pull and wiggle with a 2X4. 4 bolts undo the steering and trim.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By lockaby32 in forum Polaris How To & FAQsReplies: 36Last Post: 06-04-2011, 12:08 PM
By xplayer2885 in forum Polaris How To & FAQsReplies: 7Last Post: 08-03-2008, 09:13 AM
By ugadawg131 in forum Polaris Open DiscussionReplies: 1Last Post: 09-22-2006, 09:21 AM
By daveo13 in forum Polaris Open DiscussionReplies: 7Last Post: 09-08-2006, 03:59 PM
By CrazyA in forum Yamaha How To & FAQsReplies: 6Last Post: 09-01-2006, 07:49 PM