Results 1 to 2 of 2
  1. #1

    moving trottle control to other handle???

    i want switch trottle control from right handle bar to left handle bar, can this be done? and if so is it difficult, has someone done this, I have a 1996 GTS Seadoo. thanks to anyone who can give me info on this, Whip
    Last edited by whipdoo; 08-15-2007 at 02:17 PM. Reason: more discription

  2. #2
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Worcester MA
    I am in the process of doing this. I purchased the Riva Throttle kit but the plastic covering didn't suit my tast, rather cheap looking.

    Take a look at this thread

    Jaycee used the stock plastic assemblies. It is definitely much clean looking.
    JayCee used the extension in the kit. I am opting not too as I want to be able to use my stock cover plus being 5'6" any further spread of my arms will be uncomfortable. I had to modify the plastic assemble with a coping saw and sander. The, as did Jaycee, had to drill a hole in the plastic cover. No biggie there. Just make sure the hole location and the throttle location doesn't crimp the cable. If you attempt it it will take about 1 to 1.5 hours.

    Tools needed
    1 punch needed to punch the handlebars in drilling the handle bars.
    1 set of good metal drill bits. A drill bit is provided in the kit but it stinks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. switched to open loop cooling on my SC 4-tec XPL
    By rapidacceleration in forum Conversion PWC Performance Skis
    Replies: 27
    Last Post: 04-12-2010, 09:29 PM
  2. Which wire for switched 12v on RXP?
    By RXPDAVID in forum 4-Tec Performance
    Replies: 33
    Last Post: 07-15-2007, 07:54 PM
  3. What does the tip over switch look like on gtx-sc?
    By MikeTrin in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 09-06-2005, 01:18 PM
  4. My new piggyback fuel controller with bigger injectors
    By Green Hulk in forum 4-Tec Performance
    Replies: 18
    Last Post: 06-17-2005, 02:21 PM
  5. The importance of using kill switches
    By bling bling in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 05-13-2005, 01:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts