Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1

    1.4mph gain today

    Hey guys,i went out today after cutting holes in the bucket and cowl and also removing some of the air induction box on both sides,adjusted my jet nozzle because the factory had it off by 17mm and ran 65.3mph with 3/4 tank of fuel,1/4 tank more than my last run at 63.9mph... I believe i could have run even better but some ski boats started roughing up the water so i only got in 3 passes... I will make sure to have a lot less fuel the next time!!!!!!!!! Still know add ons yet!!!


  2. #2
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    you should get a new rideplate.. and have it modded by jim you'll have like 5 more mph than stock ride plate... the numbers look not bad, what octane do you use?

  3. #3
    what are you riding.. 06? 07?
    when you say you adjusted nozzle.. do you mean left and right to make it trac straighter?
    I ride an 03 and would love to get that much out of a few easy mod's.

  4. #4
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1
    Quote Originally Posted by HallPass View Post
    you should get a new rideplate.. and have it modded by jim you'll have like 5 more mph than stock ride plate... the numbers look not bad, what octane do you use?
    89 octane and a little too much like 5 or 6 bars on the gauge... i have a pump seal kit and a r&d intake grate coming this week.. I am also getting the ride plate from Jim,my friend Chip called him this week for me and will be next on my mod list!!!!

  5. #5
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1
    Quote Originally Posted by HallPass View Post
    you should get a new rideplate.. and have it modded by jim you'll have like 5 more mph than stock ride plate... the numbers look not bad, what octane do you use?
    I will be getting my plate from Jim soon for sure but this week i will receive my pump seal kit and intake grate...89 octane,and too much of it !!!

  6. #6
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1
    Quote Originally Posted by villerugger9 View Post
    what are you riding.. 06? 07?
    when you say you adjusted nozzle.. do you mean left and right to make it trac straighter?
    I ride an 03 and would love to get that much out of a few easy mod's.
    I adjusted it side to side at first when i got the ski last week but after reading a post on the forum to check the up and down movement sure enough it was out by 17mm in the down position from the factory... i leveled it out and cut the air holes and that is it,i am guessing with the same amount of fuel as my 63.9mph pass i know i could get 2mph instead of 1.4mph... my ski is an 07,,,,thanks

  7. #7
    xxx2's Avatar
    Join Date
    Oct 2006
    Location
    panama city bch, Fl
    Posts
    421
    +1
    35
    Quote Originally Posted by james k View Post
    my friend Chip
    Does that guy still ride jetskii's? I'm in PCB also

  8. #8
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1
    Quote Originally Posted by xxx2 View Post
    Does that guy still ride jetskii's? I'm in PCB also
    Yes, he has a gp1200 with a descent amount of mods...Not exactly sure what speed but it should be fast!!!!

  9. #9
    xxx2's Avatar
    Join Date
    Oct 2006
    Location
    panama city bch, Fl
    Posts
    421
    +1
    35
    Should be fast That's what I hear...even today when he stopped by my shop! hit me up if ya ever wanna ride! I have a 15f,xl1200,& a ol' X2.

  10. #10
    james k's Avatar
    Join Date
    Aug 2007
    Location
    Panama City Beach,FL
    Posts
    950
    +1
    1
    Quote Originally Posted by xxx2 View Post
    Should be fast That's what I hear...even today when he stopped by my shop! hit me up if ya ever wanna ride! I have a 15f,xl1200,& a ol' X2.
    He should have his back out on the water shortly and we can all get together and ride.. chip has been helping me with my ski and so far so good....

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Franks Stage-3 testing today
    By peteshauling in forum 4-Tec Performance
    Replies: 17
    Last Post: 09-11-2008, 01:54 PM
  2. Almost sank my rxp today!
    By nitro rxp in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-20-2005, 09:37 PM
  3. Speed Run Today
    By Peligroso in forum 4-Tec Performance
    Replies: 15
    Last Post: 05-11-2005, 02:33 AM
  4. Today's test results 5/9/05
    By Jrsrxp in forum 4-Tec Performance
    Replies: 12
    Last Post: 05-10-2005, 01:32 PM
  5. Replies: 1
    Last Post: 04-30-2005, 10:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •