Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555

    machine drawings

    I was wondering if anyone had the machine drawings for the alignment tool and/or any other useful tools for polaris ski's.


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Alignment tool 20mm + o - .0005" Turn down one end to .710 for 2"

  3. #3
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    Isn't there a plate too? and how long is the overall length..

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Quote Originally Posted by FLjoyrider View Post
    Isn't there a plate too? No plate you use your stator with the impeller and stub shaft removed. and how long is the overall length..3'
    The huricane requires a longer one.

  5. #5
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    so if I were to buy a 3' long 20mm shaft all I'd need to do is turn one end down to .710" for 2"... as long as the shaft I buy has a diameter and straightness tolerance of + - .0005"? what about the impeller removal tool.. that has splines so probably best bet to just buy one right?

  6. #6
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    what material.. stainless?

  7. #7
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    aren't those tolerances a little tight for a 3' length?

  8. #8
    Another Polaris tool

  9. #9
    FLjoyrider's Avatar
    Join Date
    Jul 2007
    Location
    Florida
    Posts
    555
    LMAO.. I don't have the RXL anymore so we won't be needing that (first polaris EFI sled)

  10. #10
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Why not just rent or buy the tool from beerdart, seems easier and it's pretty inexpensive.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HOW TO ORDER: Custom Machined 4" SC Inlet Adapter
    By Shibby1485 in forum 4-Tec Performance
    Replies: 85
    Last Post: 08-24-2006, 07:25 AM
  2. Check out this guys machining abilities
    By Yuji in forum Sea Doo Open Discussion
    Replies: 7
    Last Post: 04-20-2006, 07:57 AM
  3. service department answering machine
    By Lurker in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 04-09-2006, 08:50 AM
  4. Amp draw
    By CrazyA in forum 4-Tec Performance
    Replies: 7
    Last Post: 03-08-2006, 03:04 AM
  5. stock machines rxp vs. stx-15f
    By scattass in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 08-31-2005, 02:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •