Results 1 to 8 of 8
  1. #1

    Join Date
    Apr 2007
    Location
    Barrie, Ontario
    Posts
    8

    Carb Settings?? 95 SL 750

    I just bought a set of used carbs for my SL 750. What are the stock settings for the high and low screws?? The boat is bone stock. I actually ran a new motor on the carbs the way they were set without checking (bonehead move) and it ran OK, but all 3 plugs are burning different. The rear plug was brown but dry and looked like it could almost be detonating, where the middle and front are light brn and wet.
    Thanks
    Chad


  2. #2
    Tony's Avatar
    Join Date
    May 2007
    Location
    North Carolina
    Posts
    1,760
    +1
    38
    What did the carbs originally come off of? You may need to rejet.

    Here's some good reading. http://greenhulk.net/forums/showthread.php?t=15473

  3. #3

    Join Date
    Apr 2007
    Location
    Barrie, Ontario
    Posts
    8
    As far as I know, they are off a 95. I guess I better check that as well. What are the stock jetting specs as well as screw settings for a 95 SL 750?

    Thanks
    Chad

  4. #4
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,328
    +1
    29
    Tech section under Fuji carburetor. Or check out the manual posted in there too.

  5. #5
    Tony's Avatar
    Join Date
    May 2007
    Location
    North Carolina
    Posts
    1,760
    +1
    38
    Quote Originally Posted by chipeia View Post
    As far as I know, they are off a 95. I guess I better check that as well. What are the stock jetting specs as well as screw settings for a 95 SL 750?

    Thanks
    Chad
    LS screw 1/2 turn
    HS screw Mag 1 turn Center 1/2 turn PTO 3/4 turn

    Pop off 10-18 psi

    Pilot jet #75
    Main jet #90

  6. #6

    Join Date
    Apr 2007
    Location
    Barrie, Ontario
    Posts
    8
    Great,
    thanks guys.
    Question, why are the screws set so much different?

  7. #7

    Join Date
    Apr 2007
    Location
    Barrie, Ontario
    Posts
    8
    Set different on the HS that is!!
    Chad

  8. #8
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    The settings are different to compensate for cylinder heating and cooling between the cylinders.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stock carb settings 95 slt 750
    By 153stars in forum Polaris Open Discussion
    Replies: 1
    Last Post: 09-11-2011, 09:57 PM
  2. Carb settings on Sl 750 ?
    By Puerto-Rico in forum Polaris How To & FAQs
    Replies: 5
    Last Post: 07-20-2010, 04:51 PM
  3. wtb 95 sl 750 carbs
    By mikem0987 in forum Polaris Classifieds
    Replies: 2
    Last Post: 09-01-2008, 09:12 AM
  4. Carb setting suggestions, SL 750
    By Larsonator in forum Polaris PWC Performance
    Replies: 28
    Last Post: 07-13-2008, 05:43 PM
  5. 95 sl 750 carb settings
    By scottr2200 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 07-16-2007, 12:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •