Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: More speed!

  1. #1
    Antiguan FZR's Avatar
    Join Date
    Jan 2007
    Location
    Antigua Caribbean
    Posts
    1,107
    +1
    3

    More speed!

    I am going to end up with a full blown stage 3 but want to get there in stages. I got a Stage 2 RXP doing a solid 75 GPS.

    If I add the Stage 3 s/c housing and impeller and 42 injectors add some pitch to the 15/20 will I see a substaintial improvement in top end and acceleration? Like maybe 78GPS and 1 second less to 30?

    Can the stock ECU handle this s/c and injectors?

    I cannot add the rear intake because we run in the rough stuff 70% of the time.

    Any other suggestions?
    Last edited by Antiguan FZR; 08-15-2007 at 07:47 AM.


  2. #2

    Join Date
    Aug 2006
    Location
    Gonzales, La
    Posts
    2,145
    +1
    9
    I've been considering the exact same combo. The only guidance I can give you comes from here:

    http://www.greenhulk.net/forums/showthread.php?t=32383

    "speedy" has gone 78.1 @ 8100 rpm with the stock ECU, 42 lb/hr injectors, XS power intercooler, and Riva S3 S/C.

  3. #3
    El Tartaro luismendez25's Avatar
    Join Date
    Jun 2005
    Location
    Orlando, Fl
    Posts
    555
    I have the same set up and i havent finished tuning yet.Bu i will say mid to high 77's.

  4. #4

    Join Date
    Jun 2006
    Location
    toronto
    Posts
    965
    Those new mods added to your Stage II dialed in properly will get you to 77-78 and wake up your accelleration a touch.

  5. #5
    Antiguan FZR's Avatar
    Join Date
    Jan 2007
    Location
    Antigua Caribbean
    Posts
    1,107
    +1
    3
    Just ordered the Stage 3 s/c, Ceramic bearings & 42 injectors.
    I also have the thermostat to be installed this weekend.
    Question.
    Do you think the Plastic I/C tubes will hold up? So far no problems. I am thinking of having them made locally if needed.
    78 here I come.

  6. #6
    You will be fine with the stock ECU. Also with the added heat of the S3 Charger you could melt the Platic IC tubes. Go metal

  7. #7
    YoYamma's Avatar
    Join Date
    Aug 2006
    Location
    Central Florida
    Posts
    21,554
    +1
    4,771
    Quote Originally Posted by Antiguan RXP View Post
    Just ordered the Stage 3 s/c, Ceramic bearings & 42 injectors.
    I also have the thermostat to be installed this weekend.
    Question.
    Do you think the Plastic I/C tubes will hold up? So far no problems. I am thinking of having them made locally if needed.
    78 here I come.
    Hold on tight bro!!!

  8. #8
    jetskiguy69's Avatar
    Join Date
    Feb 2007
    Location
    Antigua
    Posts
    36
    Quote Originally Posted by Antiguan RXP View Post
    Just ordered the Stage 3 s/c, Ceramic bearings & 42 injectors.
    I also have the thermostat to be installed this weekend.
    Question.
    Do you think the Plastic I/C tubes will hold up? So far no problems. I am thinking of having them made locally if needed.
    78 here I come.

    With all those mods, I hope I don't have to pull you to shore

    06 Honda R-12X
    07 Ultra 250

  9. #9
    YoYamma's Avatar
    Join Date
    Aug 2006
    Location
    Central Florida
    Posts
    21,554
    +1
    4,771
    Quote Originally Posted by jetskiguy69 View Post
    With all those mods, I hope I don't have to pull you to shore

    06 Honda R-12X
    07 Ultra 250
    That's the only time you'll be in front...

  10. #10
    Seadoo123's Avatar
    Join Date
    Jul 2007
    Location
    Wisconsin
    Posts
    46
    Quote Originally Posted by YoYamma View Post
    That's the only time you'll be in front...
    lol.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How To: Plugging rideplate holes for more speed
    By Green Hulk in forum Sea Doo How To & FAQs
    Replies: 71
    Last Post: 08-12-2012, 07:06 PM
  2. Weight Distribution and MORE speed
    By sr71bb in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-30-2006, 06:38 PM
  3. Newbie & Want More Speed For My GTI
    By Flynfox in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-10-2006, 11:22 AM
  4. More speed for an XLL/XLT?
    By snowrunner in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-28-2006, 12:34 PM
  5. 1300 R NEED MORE SPEED 75.8
    By JOSE13RT in forum Yamaha PWC Performance (2-stroke)
    Replies: 18
    Last Post: 07-15-2006, 06:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •