Results 1 to 3 of 3

Thread: head work

  1. #1
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17

    head work

    hi jim i would like my stock head worked so i can run 155 psi aprox across all three cylinders,
    ive asked about and it seems cool to run pto in line with other two cylinders,
    i have a stock head un cut to send you if this is ok and you have the time ect.
    whats my best psi range to aim for,its on a welded crank
    always run 95 octane min...
    still cool to paypal...???

    paul...


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by Hydrotherapy View Post
    hi jim i would like my stock head worked so i can run 155 psi aprox across all three cylinders,
    ive asked about and it seems cool to run pto in line with other two cylinders,
    i have a stock head un cut to send you if this is ok and you have the time ect.
    whats my best psi range to aim for,its on a welded crank
    always run 95 octane min...
    still cool to paypal...???

    paul...
    Hello Paul, On a stock head it's going to be staggered on number 3 cylinder because of the dome being deeper and wider. Reworking the squish band will not get it even across the board. There will be a 5 psi. difference.

  3. #3
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    damn...so its aftermarket heads only for me to gain the 155 across all three

    thanks jim...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Advice needed from the big dogs, Lets talk Head work!
    By boostaholic in forum 4-Tec Performance
    Replies: 1
    Last Post: 12-25-2007, 06:43 PM
  2. HEAD WORK
    By ebarfool in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 05-20-2007, 12:36 AM
  3. head work?
    By Dentwizard in forum Yamaha Old School Skis
    Replies: 6
    Last Post: 03-10-2007, 11:37 PM
  4. I`m sorry but head work ... HA!
    By HOSS in forum 4-Tec Performance
    Replies: 17
    Last Post: 01-02-2007, 08:37 PM
  5. head work
    By JOSE13RT in forum 4-Tec Performance
    Replies: 9
    Last Post: 11-04-2006, 12:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •