Thread: crank questions
08-19-2007, 01:13 PM #1
What happens if I am missing 2 of the little pins that stick in the crank that rest in the little slots in the cases. Can I get new ones or what should I do.
08-19-2007, 01:31 PM #2
one of my bearings didnt have a pin, i used sleeve lock loctite and with the cases together it wont move... you could just get pins too.
08-19-2007, 01:43 PM #3
not familar with sleeve lock loctite??? Also I cant find the pins on yamahas parts website. The ones that Im talking about are on the bearings on either side of the middle rod that rest ON the case to keep the bearings from spinning.
Last edited by whiteyz; 08-19-2007 at 01:47 PM.
08-19-2007, 02:30 PM #4
sleeve lock is for locking new sleeves in the cylinder, ive never used it for that..but its purpose is to keep metal from slipping, at high temps...
heres a pic of my crankworks crank and it had no pins on the bearings
08-19-2007, 03:18 PM #5
wonder if it would hurt if installed with no pins or sleeve lock.
Do you have a link on how the sleeve lock is applied or where I can get it. I couldnt find any info on it.
08-19-2007, 03:50 PM #6
08-19-2007, 03:53 PM #7
08-19-2007, 04:05 PM #8
08-19-2007, 04:09 PM #9
08-19-2007, 04:11 PM #10
probably wouldnt hurt but do it anyway to be safe..
sorry guys its not loctite, its permatex, sleeve retainer..
its a liquid so you just drop some on and put the case halves together...
just another thought, does your front bearing have a placement pin?, cuz its crutial that the lubrication hole gets lined up with the lube hole in the case...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Pro-pulsion in forum 2-Stroke PerformanceReplies: 0Last Post: 06-14-2009, 05:10 PM
By jabbas in forum Polaris Open DiscussionReplies: 2Last Post: 04-09-2008, 09:49 PM
By pdxrealtor in forum 2-Stroke PerformanceReplies: 4Last Post: 01-30-2008, 01:27 AM
By carl sagan in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 06-04-2007, 10:17 PM
By xlint89 in forum Polaris Open DiscussionReplies: 6Last Post: 04-28-2007, 03:28 PM