Page 1 of 34 1 2 3 11 ... LastLast
Results 1 to 10 of 336
  1. #1
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26

    I can't leave the Cane alone either

    Well, I guess the Hurricane project is done. I rode it 5 times and the last two times it cut out and died going WOT after a very short burst. The top of the pistons look fine. I'm guessing stator or dirty carbs. All you sons of bitches modding these damn Canes got me itching something awful. Boy I got the fever now...LOL Anyway, best I got out of the Cane stock was 47 to 48 Mph is that good or bad? The bottom of my hull is trashed. The first owner must have been a idiot. I need to get my a$$ to the lake this weekend and determine if the Cane's problem is electrical or not. It's on a stand at the lake. It's much more fun towing running skis back and fourth.
    So, to anticipate dirty carbs, I have the first two mods ready to go, unless better advice tells me other wise.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Photo_082107_001.jpg 
Views:	117 
Size:	68.3 KB 
ID:	36289   Click image for larger version. 

Name:	Photo_082107_002.jpg 
Views:	110 
Size:	80.6 KB 
ID:	36290   Click image for larger version. 

Name:	Photo_082107_003.jpg 
Views:	115 
Size:	80.3 KB 
ID:	36291   Click image for larger version. 

Name:	Photo_082107_004.jpg 
Views:	106 
Size:	64.2 KB 
ID:	36292   Click image for larger version. 

Name:	Photo_082107_005.jpg 
Views:	111 
Size:	73.3 KB 
ID:	36293   Click image for larger version. 

Name:	Photo_082107_006.jpg 
Views:	125 
Size:	56.8 KB 
ID:	36294  



  2. #2
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    I got these from Del a while ago. They are part no. 1253202 and should be 40's off 1998 to 2000 SLH and SLTH models. They have factory 142 main's with 68 lows. The cane's 38's have 155's and 70's. The center of that magazine article states that they are 40's. I don't have a sales brouchers for any of those years. Stock 40's should be good for now? Oh almost forgot I did say two mods waiting to go.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	page2.jpg 
Views:	409 
Size:	126.0 KB 
ID:	36301  
    Last edited by Polaris_Nut#1; 08-24-2007 at 03:10 PM.

  3. #3
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    Mod number two, New Reeds. OK, so for mod number three I have to yank my ride plate off the Parts Cane and ship it to Mick who will hopefully have great things to say about his new plate mod after he test it, and for mod number four I need to find somebody that can do a great job hacking two inches out of my exhaust pipe. Anybody? I may have to talk to my old boss that guy can do anything.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_0815.jpg 
Views:	94 
Size:	96.6 KB 
ID:	36302   Click image for larger version. 

Name:	100_0816.jpg 
Views:	92 
Size:	103.0 KB 
ID:	36303   Click image for larger version. 

Name:	100_0817.jpg 
Views:	92 
Size:	109.8 KB 
ID:	36304  

  4. #4

    Join Date
    Jun 2007
    Location
    On the water getting wet
    Posts
    105
    Quote Originally Posted by Polaris_Nut#1 View Post
    Mod number two, New Reeds. OK, so for mod number three I have to yank my ride plate off the Parts Cane and ship it to Mick who will hopefully have great things to say about his new plate mod after he test it, and for mod number four I need to find somebody that can do a great job hacking two inches out of my exhaust pipe. Anybody? I may have to talk to my old boss that guy can do anything.
    Tomorrow is the test day, if shipping is possible i can mod my pipe to

    Mick

  5. #5
    Banned User
    Join Date
    Aug 2006
    Posts
    1,236
    John, have you checked the screens?

  6. #6
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    Quote Originally Posted by wetherby View Post
    John, have you checked the screens?
    I'm hoping that's what it is. I can't work on it at the lake to save my life. Every time I take the seat off some jerk comes ripping by to close to shore in a power boat and the damn wave splash right in the engine compartment. I'm going to hopefully rule out electrical as a possibility tomorrow. I figure if I got to take it home and yank the carbs. Why not slap in the V-forces and the 40's

  7. #7

    Join Date
    Sep 2006
    Location
    topeka,ks
    Posts
    3,332
    zigler has got some cane carbs

  8. #8
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26

    The Pile Grows

    Thanks Aaron!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_1186.jpg 
Views:	101 
Size:	573.0 KB 
ID:	44893   Click image for larger version. 

Name:	100_1188.jpg 
Views:	99 
Size:	652.0 KB 
ID:	44894   Click image for larger version. 

Name:	100_1191.jpg 
Views:	122 
Size:	687.8 KB 
ID:	44895   Click image for larger version. 

Name:	100_1193.jpg 
Views:	107 
Size:	615.7 KB 
ID:	44896  

  9. #9
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26

    Struck Another Deal

    Thanks to Bob aka Lugs this bad Larry is now on route and going to a good home. I hope it doesn't mind Hurricane season. Thanks my man, I patiently await my early Christmas present to meeeee.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF2704.JPG 
Views:	93 
Size:	466.1 KB 
ID:	44897   Click image for larger version. 

Name:	DSCF2705.JPG 
Views:	99 
Size:	470.9 KB 
ID:	44898  

  10. #10
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    I didn't even see you gathering the goodies......nice!!!!
    Did you mod the reeds to match the intake track yet?

Page 1 of 34 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2014 RXP-X Build Tread Can't Leave well enough alone
    By Askin in forum Sea Doo Build Threads
    Replies: 6
    Last Post: 12-17-2014, 08:42 AM
  2. 08 RXPX can I leave the rectifyer in place after a 4inch Fizzle install
    By gnalikalotamonky in forum 4-Tec Performance
    Replies: 10
    Last Post: 05-04-2010, 09:36 PM
  3. can i leave the stk fpr and just add a turbosmart rrfpr?
    By dav_dman in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-13-2009, 09:31 AM
  4. Should we go premix or leave the oil pump alone?
    By PWCManiac in forum Yamaha PWC Performance (2-stroke)
    Replies: 54
    Last Post: 07-13-2007, 01:13 AM
  5. Can I leave my ski outside in the cold?
    By tbyrne in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 03-30-2007, 08:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •