Results 1 to 5 of 5
  1. #1
    wsony13
    Join Date
    Apr 2007
    Location
    Boynton Beach, Fl. / West Palm Beach
    Posts
    23

    Need Help On Motor Mounds

    I Need To Replace All 4 Motor Mounds , Got A Set Off Of Ebay, And Come To Find Out The Ones I Remove From My Ski Has Two Studs Not One Stud Can I Still Use These Or Do I Need To Get The Same Ones Im Removing Because The Hole Is Long Gated I Know Its For Alinement But Just Needing To Know , Second Question Is There A
    Easy Way To do My Own Self Alinement For The Motor? and Third Question Is It Common That The Coupling That Gets The Grease Leaks Out The Grease It Is Not Over Fill, It Just Seems Like Its Throwing Grease Out Of The Area... Thanks 1996 SLX 780


  2. #2
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    I'd try to get the same mounts you have in the boat. Doing it without the tool is nearly impossible, you can rent one from Beerdart. The seals on the through hull seal may be going bad. You can get a used one pretty cheap, or replace the seals in yours.

  3. #3
    wsony13
    Join Date
    Apr 2007
    Location
    Boynton Beach, Fl. / West Palm Beach
    Posts
    23
    anyone out there have a set (4) motor mounds for sale for this slx780 1996 they have to have the two studs on them.

  4. #4
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39

  5. #5
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    I don't think those are the same. There's no "nub" stud for centering the engine plate.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need help on pulling motor out of 08 gp1300r???
    By ZIGGY18 in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-05-2010, 05:03 PM
  2. guys, I really need help on this one
    By maguyver in forum Yamaha Old School Skis
    Replies: 19
    Last Post: 02-11-2008, 10:08 PM
  3. Need Help on 02 virage 700cc
    By jeffholloway96 in forum Polaris How To & FAQs
    Replies: 13
    Last Post: 12-19-2007, 07:48 AM
  4. Need help on a 440!!
    By thesepaperwings in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 11-15-2007, 08:36 AM
  5. Replies: 11
    Last Post: 08-25-2006, 06:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •