Results 1 to 6 of 6
  1. #1
    xsantia's Avatar
    Join Date
    Nov 2006
    Location
    Israel
    Posts
    60

    No SPARK, after 10 min of raceng!!!

    Hi My MSX 140 were made me much problems last time, the first problem were that displayed warning temperature of the engine, -it were water temperature sensor damaged, yesterday got him from Discounthondaparts.com, now temperature is normal, but after 10 min of racing engine, is down, I’m start him, and after 10 second hi is down once more, and so after 10 sec the same and the same, after 20 min of checking, i see ,that no spark, so now hi is dead, I’m cheeked crank sensor and found that hi is only 150 Ohm.Must be 200 Ohm, and when tester connected to him ,engine cranking, -is now different ohm’s in it only 150-156 Om ,if it properly? And what I must check also? Battery is good condition.[/font]
    Last edited by xsantia; 08-31-2007 at 10:37 AM.


  2. #2

    Join Date
    Sep 2006
    Location
    topeka,ks
    Posts
    3,332
    well mate , your battery needs 2 be tested , i know you here it cranking but most of the time its the battery ,

    also need 2 some shopping on a possibile stator

    othere will chime in

  3. #3
    xsantia's Avatar
    Join Date
    Nov 2006
    Location
    Israel
    Posts
    60
    Quote Originally Posted by 97sltx1050 View Post
    well mate , your battery needs 2 be tested , i know you here it cranking but most of the time its the battery ,

    also need 2 some shopping on a possibile stator

    othere will chime in
    Ok, i'm installed new batery, 13.2V, and geted the same result,-no spark!
    in the coils 0.0 volt, in the capasitor 26.5-27.0 volt.
    what to see and chech also?

  4. #4

    Join Date
    Sep 2006
    Location
    topeka,ks
    Posts
    3,332
    WATCON.COM
    6487 Seabeck Hwy

    NW Bremerton, WA 98312
    Phone: (360) 692-3492 Fax: (360) 692-2285
    http://www.watcon.com/
    e-mail us at [email protected] ask for randy


    ask this guy if he has time 2 bullshit , and he'll tell ya what part number the stator or cdi your going 2 need 2 shop 4

  5. #5
    xsantia's Avatar
    Join Date
    Nov 2006
    Location
    Israel
    Posts
    60

    Problem resolved!!!!!!!

    it were shortcut in the TPS, after disconecting all came back, motor is work!!!Now ,only replace TPS and go!!!!!

  6. #6

    Join Date
    Sep 2006
    Location
    topeka,ks
    Posts
    3,332
    thorttle position sensor

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1995 SL 650 no spark after an extensive amount of testing... HELP!
    By Mxz155 in forum Polaris Open Discussion
    Replies: 0
    Last Post: 08-08-2016, 05:09 PM
  2. gp1300r exhaust warning light after 10 min. of riding... Help!!
    By rologp in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 01-06-2011, 09:05 PM
  3. SL900 - No Spark after an hour
    By rrated999 in forum Polaris How To & FAQs
    Replies: 1
    Last Post: 08-28-2008, 08:34 PM
  4. 1996 sl 700 no spark after update kit
    By racer447 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 06-18-2008, 06:29 PM
  5. MSX 140 overhetting after 10 min.
    By xsantia in forum Polaris Open Discussion
    Replies: 9
    Last Post: 07-28-2007, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •