Results 1 to 5 of 5
  1. #1
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2

    Question what size screw driver? ( side panel )

    What size screwdrivers do i need to take off my side panels, or cowels i think there also called... I'm swapping mine out for another pair i bought..


    ???

    thanks guys!


    -Hallpass


  2. #2
    i think there metric allen head bolts like an 8 or so

  3. #3
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    Please help... i want to install these like as soon as possible!

  4. #4
    KamikazeGPR's Avatar
    Join Date
    Mar 2007
    Location
    Philadelphia
    Posts
    1,361
    +1
    99
    yes,they are allen head. Im not sure of the size. I just went through the bits til i found the right size. Be careful of the 2 under the glovebox. The are cheap, odds are they will strip before they come out of the backing plate.

    When it happened to me. I cut off the bolts from behind with a dremel cutting wheel and replaced them with same size and style stainless bolts and stainless nylon insert nuts from west marine. I threw the backing plate away. It still had the cut off bolts stuck in it.

    Even with the bolts out, the fairings still have plastic mounting clips that hold it on. I used a small screw driver to pry it out to locate the clips and get my fingers behind it and pulled slowly until it popped. It feels like it going to break, but eventually it will give way and pop free. Pretty scary stuff

  5. #5
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    pics!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 7
    Last Post: 02-14-2013, 08:13 AM
  2. what size screw driver? ( side panel )
    By HallPass in forum Yamaha How To & FAQs
    Replies: 4
    Last Post: 09-01-2007, 04:01 PM
  3. What size Tap on reverse bucket?
    By dhoad in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-25-2006, 08:58 AM
  4. What size bit and tap for dynotune gauge
    By excess in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-30-2006, 06:10 PM
  5. Fuel lines-what size and mfgr?
    By cfgp927 in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 01-22-2006, 04:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •