Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Oct 2005
    Location
    Ann Arbor, MI
    Posts
    1,439

    How hard is it too....

    How hard is it too install the New S/C washers?? I mean Yall pretty much know my capabilites on jetskis (kind of sort of ok, scale of 1-10 I would give myself a 3 or 4) So could i do it with out screwing it up?? And are Les washers just as strong as the new ones Jerry is coming out with?? Because I would rather change them out now then during the season and risk down time. Thanks!

    and while we are on the subject how ahrd is it to install a rive S/C impeller?


  2. #2
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,466
    +1
    3
    it's a simple job.... just requires special tools

    takes longer to pull the supercharger out of the ski and put it back in than it does to rebuild the SC with a whole new clutch

  3. #3
    Will work on YOUR ski for FREE! GeoRXT's Avatar
    Join Date
    Mar 2006
    Location
    Miami, FL
    Posts
    4,442
    +1
    1

    Re: How hard is it too....

    [quote="

    and while we are on the subject how ahrd is it to install a rive S/C impeller?[/quote]

    I have the same question. Even though I found a shop that will do it for me for about $70 I would like to know if I could do it myself.

  4. #4
    rxpblast's Avatar
    Join Date
    Jun 2005
    Location
    Ocean City, MD
    Posts
    2,113
    you are going to need the right tools for this job. but with those tools it wont be to hard to accomplish.

  5. #5

    Join Date
    Oct 2005
    Location
    Ann Arbor, MI
    Posts
    1,439
    ok so what are the special tools and where can i get them...Does anyone have pics of the procedure? I read the instructions on Riva but no pics .
    maybe a good I dea of a new technicle thread

    On a scale of 1-10 how hard...? (for boht the Riva Impeller and clutches)

    And on a side note:shib did you get my PM?

  6. #6
    rxpblast's Avatar
    Join Date
    Jun 2005
    Location
    Ocean City, MD
    Posts
    2,113
    Jerry may have some of the tools and im sure u can get them through Riva.

  7. #7

    Join Date
    Oct 2005
    Location
    Ann Arbor, MI
    Posts
    1,439
    ok...thanks

  8. #8
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,976
    +1
    1,895
    All the supercharger tools are available in the store here:

    http://www.4-tecperformance.com/inde...cPath=18_11_46

    You will want the retaining key and the support plate.

  9. #9

    Join Date
    Oct 2005
    Location
    Ann Arbor, MI
    Posts
    1,439
    Jerry, you have PM...


  10. #10

    Join Date
    Oct 2005
    Location
    Ann Arbor, MI
    Posts
    1,439
    Are there any directions on how to install the New clutches, or any clutch for that matter...also any directions on how to install the Riva Impeller w/ pics?? Maybe some one could do a install of both with pics, and put it in the technicle forum??

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. how hard..
    By trenoa in forum Yamaha How To & FAQs
    Replies: 8
    Last Post: 06-01-2007, 10:31 AM
  2. How hard is to change the impeller??
    By hocysk8er in forum Polaris Open Discussion
    Replies: 3
    Last Post: 05-30-2007, 07:43 PM
  3. how hard....
    By trenoa in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 05-05-2007, 12:12 PM
  4. How hard to install jerrys metal washers
    By wakeborder556 in forum 4-Tec Performance
    Replies: 8
    Last Post: 02-06-2007, 10:02 AM
  5. Rotax Racing - How hard to install...
    By Jarrett in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-08-2005, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •