Results 1 to 4 of 4
  1. #1
    My new toys at work bruinsrme's Avatar
    Join Date
    Jul 2007
    Location
    Worcester MA
    Posts
    1,706

    Mods: In what order for a RXT

    Hi Everyone,

    I am planning the following mods probably in different stages.
    here are the mods I want to do, what order do you recommend?

    1. Thru the hull exhaust
    2. power filter (would prefer 4" home but info seems to be scattered about)
    3. Intercooler
    4. Repalce the wear ri with SS and new used 14/19 prop.

    I am sure the OPAS will have to be removed as well.

    SC will have the metal washers, Green Wheel and ceramic bearings
    Last edited by bruinsrme; 09-03-2007 at 02:49 PM. Reason: seplling erors added Green Wheel


  2. #2
    AKA: Larry lafjax's Avatar
    Join Date
    Jul 2006
    Location
    Jacksonville, Fl
    Posts
    3,032
    Quote Originally Posted by bruinsrme View Post
    Hi Everyone,

    I am planning the following mods probably in different stages.
    here are the mods I want to do, what order do you recommend?

    1. Thru the hull exhaust
    2. power filter (would prefer 4" home but info seems to be scattered about)
    3. Intercooler
    4. Repalce the wear ri with SS and new used 14/19 prop.

    I am sure the OPAS will have to be removed as well.

    SC will have the metal washers, GC and ceramic bearings
    The order is fine...I would add at least the green wheel for some more bang for your buck, particularly with the IC.

  3. #3
    Vman's Avatar
    Join Date
    Nov 2005
    Location
    NJ
    Posts
    4,363
    +1
    339
    This is the order I would go in... but what do I know?

    1- power filter: simple gain + you can still ride around on the stock prop.

    2- prop: that'll take full advantage of your air intake.

    3- exhaust: won't give you any gain, but you gotta do it if ya want the
    intercooler.

    4- intercooler.

    Or you could make the third mod a green wheel or Rotax racing wheel and wait on the exhaust and intercooler. That's what I would do.

  4. #4
    Vman's Avatar
    Join Date
    Nov 2005
    Location
    NJ
    Posts
    4,363
    +1
    339
    Oh... If it doesn't have metal washers then that should be your VERY FIRST mod!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need help on what impeler for a rxt -x 255 with et 18lbs
    By jccycle in forum 4-Tec Performance
    Replies: 28
    Last Post: 06-13-2014, 12:47 PM
  2. what intecooler for 08 rxt-x
    By hkallestad in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-07-2013, 02:20 AM
  3. 2004 RXP - What should I do and in what order?
    By geowelsh in forum 4-Tec Performance
    Replies: 8
    Last Post: 04-17-2011, 04:16 PM
  4. Need used crank in good order for ultra 150 or complete engine
    By tommybad in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 06-27-2010, 09:53 PM
  5. what order for mods
    By JimC in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 07-03-2007, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •