Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    Join Date
    Jun 2007
    Location
    Rockford, IL
    Posts
    8

    05 RXP Stuck at 6300rpms, help please.

    Based on what I have read on this forum my 05 RXP started to show the signs of washer failure, max speed 40mph and would not go over 6300rpms. I pulled off the intake and the SC impeller did not spin. Ski has 23hrs on it. I pulled the SC and washers were still there. I sent the SC to Jerry and he did the washer replacement and had him install upgrade impeller (since he had it apart what better time to upgrade )

    I reinstalled the SC and still same issue 40mph and 6300rpms. Anybody have any ideas on what else could be the issue? It is no fun when the wife's Wake goes faster then me. Only other upgrade is I added the Riva catch can.

    Thanks for you help.

    PS big Thanks to Jerry for answering all my email questions and his extra effort to get my SC done before the long weekend.

    Best regards,

    Dan
    Last edited by dlabonte; 09-03-2007 at 07:47 PM.


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,061
    +1
    790
    First off make sure you have the regular key and not learning key.
    Change the spark plugs, check prop wear ring condition and check oil and filter.

  3. #3
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Dan, press the "set" button 5 times and look for a trouble code on the dash. It will start with a "P"

  4. #4
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    how is the acceleration? does it get to 40 mph in a HURRY! or does it kind of just power it's way to 40mph and stay there?

    see if all 3 cylinders are firing... could be a coil pack

  5. #5

    Join Date
    Jun 2007
    Location
    Rockford, IL
    Posts
    8
    Thanks all for your input:

    I just changed the oil and filter this weekend when installed SC.
    Learning Key is white and in my work bench somewhere, but it sure seams like it is stuck in learn mode.
    It just goes up to 40 like my 05 Wake, so loss of power is definent. It does not have the off the line take off like it used to.

    I will go out and try to read any code.

    Best regards,

    Dan

  6. #6

    Join Date
    Jun 2007
    Location
    Rockford, IL
    Posts
    8
    No trouble codes that I can tell. It just gave me one long beep and showed "END" on the dispaly then went back to "Sea-Doo". So think I did it correctly.

    Thanks, did not know you could do that to read codes out.

  7. #7
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,627
    +1
    806
    BIG boost leak maybe?

    Broken stock intercooler possibly?

    Intake grate out of position?

    Just throwin ideas out there

  8. #8
    rior1's Avatar
    Join Date
    Feb 2007
    Location
    uk ESSEX
    Posts
    356
    id check your pump see if theres anything stuck up there/check your pipes for your sc are tight,if not id get straight down to someone with buds like shibby said could be your coil pack

  9. #9
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,061
    +1
    790
    Quote Originally Posted by Shibby1485 View Post

    see if all 3 cylinders are firing... could be a coil pack
    Follow Shibby's input and see what happens. It very well could be a coil pak. Unplug one at a time and see.


    .

  10. #10

    Join Date
    Jun 2007
    Location
    Rockford, IL
    Posts
    8
    The engine did feel smooth, so not sure about coil pack but will check to rule things out and narrow down possibilities.

    Do I just pull one plug at a time, touch electrode to block, hold at full throttle, cranck engine a few times and check for spark?

    I have worked on cars for a long time, but this is my first ski so still learning.

    Anyone have link to photo of IC? I don't have shop manual yet but I am guessing it is after the TB. I will recheck all boost connections for possible links. I did check TP possitoin when I had SC off to confirm I had WOT.

    Thanks again for everyones feedback and ideas to this issue. It seems to be common so will post results when I get it figured out.

    Best regards,

    Dan

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 05 RXp stuck at 7500 rpm
    By Boosted3s in forum 4-Tec Performance
    Replies: 41
    Last Post: 06-23-2011, 09:54 AM
  2. Replies: 15
    Last Post: 09-22-2010, 12:29 AM
  3. 05 RXP & RXT maintenance tune ups...please help...
    By Masterz in forum 4-Tec Performance
    Replies: 10
    Last Post: 02-18-2009, 08:24 PM
  4. 05 Rxp Riva Stage 3 Help Guys!!!
    By WannabeGoing80 in forum 4-Tec Performance
    Replies: 15
    Last Post: 03-06-2007, 11:02 PM
  5. 05 RXP HESITATION AT TOP END
    By JOSE13RT in forum 4-Tec Performance
    Replies: 9
    Last Post: 09-08-2006, 09:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •