Thread: 92 sl 650 hose hook up
09-06-2007, 05:43 PM #1
92 sl 650 hose hook up
I recently started a new project. a 92 sl 650. I purchased it as a box of parts and am reassembling it with some repairs on the way. so far I cleaned out the metal shavings in the crank from a previous meltdown by the previous owner.(looked as if the top end was rebuilt but the crank was never checked for fragments, scratched the cylinder) replaced the seals in the crank and honed 1 cylinder. I have it all together but now have a question. I am pretty sure the hoses go like this but i don't want to fill the crank with water if water goes thru these hoses. There is a rig job fitting that takes three hoses off the exhaust manifold and hooks them to the two holes on the bottom of the crank case. does this look correct? also if someone could tell me what they do. thanks,
09-06-2007, 05:46 PM #2
09-06-2007, 05:53 PM #3
also, where can i get a restrictor for the return line on the carbs? it looks as if it did not come with one.
09-06-2007, 05:59 PM #4
Contact crazya for an inline restrictor, he might even send you one for free.
Courtesy of Polaris Industries
09-06-2007, 06:08 PM #5
i see they all connect like i have. but where does #7 in the diagram lead to?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jwat32 in forum Polaris Open DiscussionReplies: 1Last Post: 06-15-2013, 03:20 PM
By GDM in forum SoutheastReplies: 3Last Post: 11-16-2012, 12:03 AM
By dannyual777 in forum 2-Stroke PerformanceReplies: 1Last Post: 03-02-2012, 08:02 AM
By rgextreme1998 in forum Polaris Open DiscussionReplies: 19Last Post: 07-30-2007, 07:23 PM
By OutlawGPR in forum Yamaha PWC Performance (2-stroke)Replies: 13Last Post: 02-26-2007, 08:31 AM