Results 1 to 8 of 8
  1. #1
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105

    Beer, How's the 785 running?

    I see you guys went on a ride today, how's that bad boy doing??


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Ran great all day still working on the handling and need to get the rpm's up some. Lugs sent me a 9/19 to try and see if I can find the 300 rpm's. Today it was 7600 @ 60-61. Also today it seamed to cavitate real bad I had the CCS grate on. I will try the [email protected] next time.

  3. #3
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    i really like the R&D on the SLT hulls.
    The final RPM's and speed are such a bitch to get but so damn easy to lose.

  4. #4
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Make sure the pump shoe is siliconed real good. When mine was cavitating I lost some RPM. After I resealed it, no cavitation and RPM came up around 300-400.

  5. #5
    Polarisracer166's Avatar
    Join Date
    Aug 2006
    Location
    Webster New York
    Posts
    694
    +1
    8
    Beer, You are going to lose huge rpm's with a 9/19. A stock dialed in 785 motor will only turn about 7900 with a 12/17...My guess is that your rpms will drop to about 7300 or so. You may want to see if you can work on your current setup to achive another 300rpms. Just my 2cents..

  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Quote Originally Posted by Polarisracer166 View Post
    Beer, You are going to lose huge rpm's with a 9/19. A stock dialed in 785 motor will only turn about 7900 with a 12/17...My guess is that your rpms will drop to about 7300 or so. You may want to see if you can work on your current setup to achive another 300rpms. Just my 2cents..
    I am looking at all resources. The 9/19 tweeked buy Impros was recommended buy the matrix man....

  7. #7
    Polarisracer166's Avatar
    Join Date
    Aug 2006
    Location
    Webster New York
    Posts
    694
    +1
    8
    Sounds good... I know Mark's 785 with Moto Marine pipes and a fully ported more will spin a 9/19 at 8100. Good luck with a stock motor and stock pipes turning that impeller.

    You guys should take a trip to Seaside Heights NJ next weekend. We will be there with 5 Pro's.. Mark included..

  8. #8
    Connecticut CrazyA's Avatar
    Join Date
    Nov 2005
    Location
    CT.
    Posts
    8,141
    +1
    1,051
    Quote Originally Posted by Polarisracer166 View Post
    I know Mark's 785 with Moto Marine pipes and a fully ported more will spin a 9/19 at 8100...
    Indeed.... and 46mm Novis with 190lbs of cranking compression!!!


    .

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How long can you run the radio before the boat wont start?
    By twinturbostang in forum Sea Doo Sport Boats
    Replies: 32
    Last Post: 07-01-2008, 11:25 PM
  2. how fast the 780slx 95 would run?
    By andy95'slx780 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 06-03-2008, 09:06 PM
  3. How do these speed runs compare with yours???
    By 1 FAST VE in forum 4-Tec Performance
    Replies: 6
    Last Post: 04-03-2007, 06:51 PM
  4. Jerry, how is the project coming?
    By ski-guy1 in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 03-01-2006, 01:51 PM
  5. Mark S how is your ski running?
    By peteshauling in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-11-2005, 09:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •