09-13-2007, 06:34 PM #1
Installing new prop now. Please help.
This may sound like a stupid question, but this is my first time doing this.
I am trying to follow Jerry's instructions from the How-To section, but I cannot figure out how to get this cone off(See Pic). Any help is greatly appreciated.
This is on a 2004 RXP.
09-13-2007, 07:08 PM #2
Never Mind I am a moron. Got this far and realized my hex key sets don't go up to 12mm. Well....Off to the hardware store.
09-13-2007, 07:09 PM #3
- Join Date
- Jul 2006
Take out the three allen screws. I had to gently tap mine sideways with a rubber mallet the first time I removed it. Once you get some clearance between it and the impeller housing you can carefully pry it off with a screwdriver.
09-13-2007, 07:10 PM #4
- Join Date
- May 2007
- Suffolk, VA
If you got the 3 allen head screws off already, then hit it with a rubber mallet lightly back and forth. it is tight. it wiil come off.
09-13-2007, 07:50 PM #5
Yeah, I got it off. That is what I did. Thanks.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SpectraBrite in forum Polaris How To & FAQsReplies: 2Last Post: 08-22-2011, 11:35 AM
By zerowake in forum 4-Tec PerformanceReplies: 13Last Post: 03-16-2009, 09:17 PM
By engineermike in forum 4-Tec PerformanceReplies: 38Last Post: 04-27-2008, 09:19 PM
By havanabama in forum Yamaha How To & FAQsReplies: 2Last Post: 01-13-2008, 09:08 AM
By PWCManiac in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 07-18-2007, 09:39 AM