Thread: Which sizes of Oetiker clamps ?
09-15-2007, 10:52 PM #1
Which sizes of Oetiker clamps ?
For the oil injection and fuel lines what sizes of clamps do I need ?
09-15-2007, 11:51 PM #2
What are "Oetiker Clamps??
09-16-2007, 06:47 AM #3
1/4 OD. Mcmaster
52545K38Gap-Free Pinch Hose and Tube Clamp 15/64" to 9/32" Clamp ID Range, 13/64" Band WidthIn stock at $7.88 per PackThis product is sold in Packs of 25
09-16-2007, 09:14 AM #4
- Join Date
- Aug 2006
The metal insert Tie wraps are used and found in electrical supply places. One brand is Brady. I think McMaster-Carr has them.
09-16-2007, 04:34 PM #5
09-16-2007, 09:36 PM #6
I don't know about the fuel ones
I will not use any plastic ties
Check the Oetiker @
Last edited by Mr Waverunner; 09-16-2007 at 09:38 PM.
09-19-2007, 08:59 AM #7
09-19-2007, 09:30 AM #8
Using an Oetiker clamp is a very good idea on these boats. I have them where ever possible. If there is a hose you are constantly removing like your Jetworks valve, for example, at least use an OEM yami clamp. Those cheap SS clamps you get at the hardware store or boat supply house will eventually break or come lose.
09-19-2007, 09:33 AM #9
09-19-2007, 10:24 AM #10
First of all THANKS !!!
I should order the Type 304 Stainless Steel right ? The part number above is for the Zinc Plated ones.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Lbaronio in forum 4-Tec PerformanceReplies: 9Last Post: 02-18-2011, 09:16 PM
By Gregg in forum 4-Tec PerformanceReplies: 5Last Post: 08-30-2007, 08:15 PM
By 07 RXP in forum Sea Doo Open DiscussionReplies: 2Last Post: 08-06-2007, 04:05 PM
By meeper in forum 4-Tec PerformanceReplies: 0Last Post: 03-06-2007, 09:23 AM
By Lurker in forum 4-Tec PerformanceReplies: 5Last Post: 09-25-2006, 09:30 AM