Results 1 to 5 of 5
  1. #1

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277

    Any other recomendations for winterization?

    I have a 2007 GPR - This is what I plan on doing. Am I missing anything?

    Wash and Wax Boat.
    Remove Battery.
    Fill gas tank and add yamaha fuel stabilizer.
    Spray engine and pump with yamaha Silicon protectant.
    Wipe seat down with Protectant.

    What about flushing with antifreeze?

    On my carbed XLT I haad to spray fogging oil into the intake. On this do I just remove the plugs spray it in there and then put them back in?

    Thanks in advance.


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Remove all 3 spark plugs push piston down with pencil erasure spray fogging oil into the cylinder by the intake ports spray for about 1 minute then go to next cylinder. Once you are done with all 3 put the spark plugs in start motor for about 10 to 15 seconds to get the oil all over and then you are done.

  3. #3

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Quote Originally Posted by jims 1300 View Post
    Remove all 3 spark plugs push piston down with pencil erasure spray fogging oil into the cylinder by the intake ports spray for about 1 minute then go to next cylinder. Once you are done with all 3 put the spark plugs in start motor for about 10 to 15 seconds to get the oil all over and then you are done.
    Spray for a full minute? That seems long but I have a feeling you know your stuff.


    What about the coolant and flushing?

    My pump is grinded and your plate will be tested on Wednesday.

  4. #4
    If you have ethanol in your area, I would store the tank empty...

  5. #5
    Hydrotherapy's Avatar
    Join Date
    Sep 2006
    Location
    The Rock
    Posts
    3,347
    +1
    17
    before i remove plugs and do as jim posted i normally mix 10 liters of fuel real heavy with oil and fogging spray shake real well and add to empty gas tank and run for as long as it will let you that way my bottom end is oil heavy plus some fogging spray,then when it dies from oil overload drain tank,

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts Wtb e1 wheel or 15 lbs wheel any other bolt on s for stage 3
    By JOSE13RT in forum Yamaha Classifieds
    Replies: 2
    Last Post: 03-14-2014, 08:32 AM
  2. Sadly it is time to pack the skis up for winter...any tips.
    By chevydog in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 10-04-2013, 09:40 PM
  3. Any other options for new MPEM ??
    By canuck in forum 2-Stroke Performance
    Replies: 5
    Last Post: 03-25-2010, 03:30 PM
  4. How-To: Flushing the open loop cooling for winter
    By 1FastTrespiper in forum Sea Doo How To & FAQs
    Replies: 8
    Last Post: 10-29-2007, 01:33 PM
  5. Any other thing to do....
    By GeoRXT in forum 4-Tec Performance
    Replies: 11
    Last Post: 04-21-2006, 04:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •