Page 1 of 7 1 2 3 ... LastLast
Results 1 to 10 of 66
  1. #1
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39

    Who can make a motor plate?tripple cane

    I need to find or have made a motor plate to bolt my 750 fuji
    into a hurricane
    maybe a motor plate from 1050 domestic--i just dont know...
    What I really want is a blank bed plate that fits onto the canes back mounts and onto the unused extra mounts in the front (of the cane)
    then i can place the motor a little more foward (room for pipe)
    maybe SHARPS or RANDY anybody got any tips hints or phone#'s
    thanks all
    mattman


  2. #2
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,776
    +1
    400

    motor

    if you move the motor foward you have to get a custom driveshaft thats longer as well

  3. #3
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,776
    +1
    400

    ds

    just saw the other post about the shaft.run the fuji off the stock back mounts and get the pro adjust a thrust or at least the 3" spacer to extended the pump out

  4. #4
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39
    Quote Originally Posted by TxPro1200 View Post
    if you move the motor foward you have to get a custom driveshaft thats longer as well
    thats not a prob, working on that w/ext pump and trim thanks
    mattman

  5. #5
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39
    Quote Originally Posted by TxPro1200 View Post
    just saw the other post about the shaft.run the fuji off the stock back mounts and get the pro adjust a thrust or at least the 3" spacer to extended the pump out
    pipe wont fit with motor on back mounts,,,front of plate floating near gas tank mounts,,,,if the plate bolted up i would just redrill some holes and be done maybe just a stock hurricane plate cut in half then replace section with holes for fuji

  6. #6
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    mattman, how about as set of Domestic plates with no center, I'll get you some photo's with measurements tonight and see what you think.

  7. #7
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39
    Quote Originally Posted by ph2ocraft View Post
    mattman, how about as set of Domestic plates with no center, I'll get you some photo's with measurements tonight and see what you think.
    like this ???? will that big one fit the front mount in the cane i can fill in the rest???or cut the stock cane plate and fill in???
    thanks
    mattman
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	nowww.jpg 
Views:	71 
Size:	19.1 KB 
ID:	38880  

  8. #8
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    I was thinking go with those mounts and re-drill the holes to match the fuji.

  9. #9
    100 MILES OF HEAVEN AND I AM SMACK IN THE MIDDLE KEYZBUM's Avatar
    Join Date
    Apr 2007
    Location
    JUST NORTH OF CUBA-- FL,KEYS
    Posts
    2,556
    +1
    39
    Quote Originally Posted by KEYZBUM View Post
    like this ???? will that big one fit the front mount in the cane i can fill in the rest???or cut the stock cane plate and fill in???
    thanks
    mattman
    Quote Originally Posted by ph2ocraft View Post
    I was thinking go with those mounts and re-drill the holes to match the fuji.
    they are from 2002 Polaris Virage TXI http://cgi.ebay.com/ebaymotors/Polar...spagenameZWD1V----if they drop right on the mounts then thats what i need ..
    thanks i would love some pics and measurments of what you have on hand
    thanks
    mattman

  10. #10
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    I'll get them tonight. As I recall they came out of a Virage as well.

Page 1 of 7 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Who makes this ride plate?
    By jcorallo in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 03-23-2010, 09:14 PM
  2. Who can make a motor plate?tripple cane
    By KEYZBUM in forum Polaris PWC Performance
    Replies: 27
    Last Post: 09-21-2007, 02:55 PM
  3. Who can tune seadoo engines in Houston?
    By ron00023 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 04-18-2006, 06:34 AM
  4. Who is making the best clutch?!?!?
    By dereksabolracing in forum 4-Tec Performance
    Replies: 11
    Last Post: 08-02-2005, 09:47 PM
  5. WHO can help???
    By CRAZEDRXP in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 06-08-2005, 11:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •