Thread: how did this happend?
09-20-2007, 05:36 PM #1
how did this happend?
i just got the nozzle with rings from "DIGGS" member, THANKS super fast shipping.
while i was removing my stock nozzle i saw this...
antifreeze is coming out , how and why?...anyway how should i fixit ?
09-20-2007, 05:42 PM #2
call your local seadoo dealer may just have to change washer out....
09-20-2007, 05:47 PM #3
09-20-2007, 05:51 PM #4
you are welcome for the fast ship on the nozzle. dont forget the two orings on the stock nozzle.
as far as the ride plate leak goes....i would pm shibby.
i am sure he knows what to do.....
09-20-2007, 05:53 PM #5
09-20-2007, 06:07 PM #6
btw i have one more nozzle setup for sale.
nozzle and 81 82 83 ring.
i can also machine nozzles as well.
09-20-2007, 07:10 PM #7
Pet is that a straight flat tip screw in the plate or is it sheered off or just REMOVED i cant tell from the pics bro??? if it WONT ACCEPT a NEW SCREW and SCREW SEAL then i would DRAIN THE COOLANT & DRY IT WELL & EPOXY the BIOTCH LITTLE HOLE SHUT and (ride it like i STOLE IT)!!!! the plate can leak within itself thats why the are not sealed on the inside only on the outside all the way around and where the coolant travels in and out of the ride plate. so if its just a screw out put one in sealed. if its STRIPPED or BROKE OFF in the plate EPOXY IT SHUT AND WORRY ABOUT IT AFTER THE SEASON! U WILL BE FINE I PROMISE BRO! i already tore one up being an IDIOT myself but u can still run that if u stop the leak there either with new srews or epoxy! just dry it well and it will work! good luck!
09-20-2007, 07:51 PM #8
thats it , i just needed to know how it works.
oh i fixed it by the way with some nelon tape and sealent. i hope it will
be ok for a wile...
..being in the garage all summer , and working all summer ihade no chanse to ride much, so my SEASON just started ....i ride all winter if its no ice on water...
09-20-2007, 07:56 PM #9
i am looking at the picture of the ride plate and i don't get it....how the antifreez circulates?! hmmm
09-20-2007, 07:59 PM #10
in one side out the other
look in your hull at th big hoses that come off the thermo housing.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By glitchen in forum 4-Tec PerformanceReplies: 16Last Post: 06-13-2013, 11:36 AM
By soulraver in forum Yamaha Old School SkisReplies: 2Last Post: 09-30-2010, 05:06 PM
By Shibby1485 in forum Sea Doo Open DiscussionReplies: 5Last Post: 05-03-2006, 08:15 AM
By rx4pain in forum 4-Tec PerformanceReplies: 9Last Post: 06-10-2005, 06:04 AM
By theantiRXP in forum 4-Tec PerformanceReplies: 12Last Post: 05-14-2005, 05:44 AM