09-21-2007, 11:04 PM #1
09-22-2007, 01:01 AM #2
You'll be using those settings from 6 o'clock to 9 o'clock, that's Ohms with that Q kinda looking symbol. As far as choosing which setting, you select the one that is just above what you expect to see.
If the manual specs 350 ohms, select the setting just above it. If your setting is lower than the value it's getting, it won't show it. Start the meter up at a high setting and bring it down for more precision if you have to.
09-22-2007, 06:50 AM #3
i cannot understand my tester
redpurple to yellow 5 ohms
white yellow to black 530 ohms
blue red to red white no reading
red white to green red noreading
09-22-2007, 09:05 AM #4
Are you disconnecting the wires from the stator when you make your measurements?
If you want to know if your charging or not run the boat (with everything connceted) and see what voltage you get to the battery ay idle and 3,000 RPM. Is it charging in the 13.5+ range??
09-22-2007, 10:55 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By karvet in forum Polaris PWC PerformanceReplies: 8Last Post: 09-13-2013, 12:56 PM
By jasonmd13 in forum Polaris Open DiscussionReplies: 39Last Post: 03-25-2013, 09:41 PM
By beans76 in forum Polaris Open DiscussionReplies: 39Last Post: 08-15-2012, 04:54 PM
By wmwbutler in forum Polaris Open DiscussionReplies: 11Last Post: 08-05-2007, 09:35 PM
By wmwbutler in forum Polaris ProjectsReplies: 1Last Post: 08-05-2007, 06:57 PM